Philips DCM250 Quick Start Manual page 2

1
Connect
2
Connect one end to the DC socket on the
main unit.
3
Connect the other end to the wall socket.
E Tip
• See the User Manual for how to connect
other equipment to this system.
2
Setup
A
Set the clock
1
In standby mode, press PROG to activate
the clock setting mode.
The 12 hour or 24 hour format is
»
displayed.
2
Press J/ K to select 12 hour or 24 hour
format.
3
Press PROG .
The hour digits are displayed and begin to
»
blink.
4
Press J/ K to set the hour.
5
Press PROG .
The minute digits are displayed and begin
»
to blink.
2
Setup
6
Press J/ K to set the minute.
7
Press PROG to confi rm.
B
3
Enjoy
A
Play disc
1
Press CD to select the disc source.
2
Insert a disc into the disc compartment
with the printed side facing up.
3
Press 2; to start play.
• To stop play, press 9 .
B
Play from USB
D Note
• Ensure that the USB device contains
playable audio content.
1
Connect the USB device into the socket.
2
Press USB to select the USB source.
The total number of tracks is displayed.
»
3
3 4
Press to select a folder.
4
Press J/ K to select a fi le.
5
Press 2; to start play.
3
Enjoy
Program and tune to radio
C
stations
A B
1
Press TUNER to select the tuner source.
2
Press and hold PROG for 2 seconds to
activate automatic program mode.
[AUTO] (auto) is displayed.
»
All available stations are programmed
»
in the order of waveband reception
strength.
3
Press J/ K to select a preset number.
D
Play iPod/iPhone
Note for product
Note for product
1
Install the supplied back plate, and load the
iPod/iPhone in the dock.
2
Press iPod to select iPod/iPhone source.
The connected iPod/iPhone plays
»
automatically.
C To pause/resume play, press 2; .
•
J/K .
• To skip to a track, press
5/6 ,
• To serach during play: press and hold
then release to resume normal play.
• To navigate the menu: press MENU , and
press 3 4 J K to select, then press OK to
confi rm.
E Tip
Note for product
Detailed features and additional functions are
described in the user manual.