Playing A Usb Mass Storage Device - Philips DC200/79 User Manual

Notes:
In some USB flash players (or memory devices), the stored contents are recorded using
copyright protection technology. Such protected contents will be unplayable on any
other devices (such as DC200 device).
Supported formats:
– USB or memory file format FAT12, FAT16, FAT32 (sector size: 512 - 65,536 bytes)
– MP3 bit rate (data rate): 32-320 kbps and variable bit rate
– WMA v9 or earlier
– Directory nesting up to a maximum of 8 levels
– Number of albums: maximum 99
– Number of tracks: maximum 999
– ID3 tag v2.0 or later
– File name in Uicode UTF8 (maximum length: 128 bytes
The system will not play or support the following:
• Empty albums: an empty album is an album that does not contain MP3/WMA files,
and will not be shown in the display.
• Non-supported file formats are skipped. This means that e.g.: Word documents
.doc or MP3 files with extension. dlf are ignored and will not be played.
• AAC, WAV, PCM. NTFS audio files
• DRM protected WMA files
• WMA files in Lossless format

PLAYING A USB MASS STORAGE DEVICE

1 Make sure your DC200 is being powered on by AC mains.
2 Press SOURCE repeatedly to select the USB mode.
3 Plug a compatible USB mass storage device to DC200's USB port marked
If needed, use a suitable USB cable to connect between the device and
DC200's USB port.
™ The device will automatically power on.
• If the device is not powered on, turn on the power manually, then re-connect it.
.