1
1
Slide the switch [E] to the 1 (low speed) or 2
(normal speed) position and carry out epilation.
•
If you are concerned about pain during epilation,
then please use with 1 (low speed) setting.
<Epilating legs or
arms>
Upwards from the
bottom of the leg.
Inwards from the
outside of the arm.
Shaving
Before shaving, wipe away water or sweat on your skin.
1
1
Attach the shaver head [D].
2
2
Remove the bikini comb [C].
3
3
Check that the outer foil is not deformed or
damaged.
4
4
Slide the switch [E] to the 1 (low speed) or 2
(normal speed) position and carry out shaving.
•
Press gently so that the whole blade is in close
contact with the skin and the surface of the blade
does not move up and down.
ES-WS20_10_CH.indb
11
Cleaning
Always clean the frames and discs after use to keep them
in a hygienic state.
Switch off and unplug the appliance before cleaning.
1
1. While holding the
frame release rib
[B2] or pressing
the sides of the
frame release
button [D7], lift the
frame up to remove it.
2. Press both sides of the inner blade and lift it up
vertically to remove the inner blade.
3. Clean the epilation
head [B], the shaver
head [D] and the inner
blade with the cleaning
brush [G].
•
When cleaning, do not use excessive force as the
blade may be damaged.
•
Push the trimmer [D5] out, and remove the hairs
accumulated on the trimmer with the cleaning
brush.
•
Wipe the hair off the main body with a dry cloth.
2
3
11
2009/12/16
16:22:42