Attaching And Removing The Tray; Using The Seat Belts - CONCORD LIMA User Instructions

_ ATTACHING AND REMOVING THE TRAY

To attach the tray to the CONCORD LIMA, first release the press studs on
the seat cover (04) and undo the Velcro fastener that is on the backrest
cover (01). Next fold back the backrest cushion. Now position the tray on the
backrest and ensure that it engages. Finally, secure the backrest cover over
the attached tray.
CAUTION!
• When used with the tray, it is essential that the tabs on the side of the
seat cover pass over the side sections of the tray and are secured to
the side press studs.
To remove the tray, first fold back the
backrest cushion and undo the press studs
on the side tabs of the seat cover.
Then release the lock (05) on the back of
the backrest and pull the tray upwards and
away from the backrest.
If you wish to use the CONCORD LIMA without the tray, secure the side tabs
of the seat cover using the press studs on the back of the backrest.
16

_ USING THE SEAT BELTS

Feed the centre strap with the buckle through
between the child's legs. Then insert the
buckle adaptors on the lap straps from above
into the top of the buckle. They should audibly
click into position.
To open the harness system, press the button
in the middle of the buckle until the buckle
adaptors are released.
CAUTION!
• Always use the restraint system and ensure it is correctly fitted.
lap strap
centre strap
17