Table of Contents
Advertisement
Quick Links
Table of Contents
1. General Information ...................................................................................................4
1.1 Main Features ..........................................................................................................4
1.2 For Your Safety ........................................................................................................4
1.3 Unpacking ................................................................................................................4
1.4 General Operation of STB .......................................................................................5
1.5 Front Panel ...............................................................................................................6
1.6 Rear Panel .................................................................................................................7
1.7 Remote Control Unit ................................................................................................8
2. Installation of STB .................................................................................................. 10
2.1 Connecting to Antenna and TV ............................................................................ 10
2.2 Connecting to TV/VCR using SCART support ................................................... 10
2.3 Connecting to TV using RCA Support ................................................................. 11
2.4 Connecting to TV using RF Support .................................................................... 11
2.5 Connecting to another SVR ................................................................................. 12
3. Menu Information ................................................................................................... 13
4. User Installation ....................................................................................................... 13
4.1 Antenna Setup - 1) DiSEqC 1.2 ............................................................................ 13
4.2 Antenna Setup - 2) Fixed ...................................................................................... 14
4.3 Channel Search - 1) DiSEqC 1.2 .......................................................................... 14
4.4 Channel Search - 2) Fixed .................................................................................... 16
4.5 System Setting ...................................................................................................... 16
4.6 Parental Lock ......................................................................................................... 17
4.7 Factory Default ..................................................................................................... 18
5 General Viewing Function ...................................................................................... 18
5.1 Select Channel...................................................................................................... 18
1
Advertisement
Table of Contents
Summary of Contents for Visiosat TVS 4600
-
Page 1: Table Of Contents
Table of Contents 1. General Information ....................4 1.1 Main Features ......................4 1.2 For Your Safety ......................4 1.3 Unpacking ........................4 1.4 General Operation of STB ..................5 1.5 Front Panel .......................6 1.6 Rear Panel .........................7 1.7 Remote Control Unit ....................8 2. Installation of STB ....................10 2.1 Connecting to Antenna and TV ................ - Page 2 5.2 Previous Channel Recall ..................18 5.3 TV & Radio Mode ....................18 5.4 TV & VCR Mode ..................... 18 5.5 Channel Information ..................... 19 5.6 Volume & Audio Control ..................19 5.7 Position ........................19 5.8 Sat ........................... 19 5.9 Favourite List ......................
- Page 3 Table of Figures, Charts and Tables Figure 1: Front Panel Figure 2: Rear Panel Figure 3: Remote Control Unit...
-
Page 4: General Information
1. General Information This digital satellite receiver allows you to view a variety of satellite programs. This user’ s guide covers the installation of the STB and the necessary steps to operate various features. It also explains special features available only in this STB in detail, and will allow you to take full advantage of these features. 1.1 Main Features Fully MPEG2, DVB compliant PIG (Picture In Graphic) support... -
Page 5: General Operation Of Stb
1.4 General Operation of STB Throughout this manual you will notice that the everyday operation of your STB is based on a series of user friendly on screen display and menus. These menus will help you get the most from your STB, guiding you through installation, channel organizing, viewing and many other functions. -
Page 6: Front Panel
1.5 Front Panel When watching a channel, adjust the volume or move to the left or right item in the menu. When watching, chang to the previous or next channel, or move to the next higher or lower item in the menu. MENU : Show the Main Menu and command box on the screen OK :... -
Page 7: Rear Panel
1.6 Rear Panel LOOP OUT: Connect to another receiver (IF loop through output from digital tuner) 0/12V:Connect to an external 0/12V switch L-AUDIO/R-AUDIO:Connect to TV or audio tuner TV:Connect to TV using scart cable VCR:Connect to VCR using scart cable AC 100-240V ~ :Power supply LNB IN:Connect to satellite antenna (IF input from LNB to digital tuner) VIDEO:Connect to the TV using RCA jack (CVBS output to TV) -
Page 8: Remote Control Unit
1.7 Remote Control Unit... - Page 9 1.9 Keys specification Press to switch between operation and standby modes Enter number of the required menu item or select a channel number to watch Switch back to previous channel Displays the main menu Move cursor up/down/left/right, Page up/down, Volume +/- Display the satellite list of searched channels Switch between TV and Radio mode Changes the mode from satellite to TV or VCR...
-
Page 10: Installation Of Stb
2. Installation of STB This section explains the installation of the receiver. Refer to the manuals supplied with the equipment for the installation of outdoor equipment such as the dish antenna. When adding new equipment, be sure to refer to the related parts of the manual for the installation. 2.1 Connecting to Antenna and TV 2.2 Connecting to TV/VCR using SCART support... -
Page 11: Connecting To Tv Using Rca Support
2.3 Connecting to TV using RCA Support 2.4 Connecting to TV using RF Support... -
Page 12: Connecting To Another Svr
2.5 Connecting to another SVR... -
Page 13: Menu Information
3. Menu Information Once you have installed and connected the cables of the receiver, the menu will be displayed. This menu consists of 5 menu options as shown below. Channel Manager Program Guide Timer User Installation Receiver Information During the installation the OK key confirms a selection and key shows the Drop Down List Box. -
Page 14: Antenna Setup - 2) Fixed
4.1.2 Reset DiSEqC limit If you want to reset the East limit or West limit, place the cursor on Reset DiSEqC Limit button and then press OK key on the RCU. The message “ Would you like to reset limit for DiSEqC positioner?” will be displayed for your confirmation. - Page 15 7. Search Mode : Select ALL or FTA. 8. Search 1 Sat : Allows you to search channels by using the arrow keys. Search 1 SAT: Search channels for one satellite, which has been selected from the Satellite column. Search TP: Search channels in one TP, which has been selected from the TP column.
-
Page 16: Channel Search - 2) Fixed
14. Search Option : The STB allows you to search channels with convenient options as shown below. FTA Only Not searched TP only Sort by Scramble If you select Sort by Scramble, The STB sorts the scrambled channels automatically. If you select Not searched TP only, the STB searches channels in the TP which were not searched. -
Page 17: Parental Lock
8. Start On Channel: If you press ok key, then the channel list is displayed. You can select one channel from the list. The selected channel starts when- ever you turn on the receiver. 9. UHF Standard: Select UHF type. 10. -
Page 18: Factory Default
4.7 Factory Default If you want to bring the STB back to the factory default condition, select Fac- tory Default and press the ok key. Then a warning message will be displayed. To confirm, select ok . Warning: On selecting factory default you will lose all of data and information, which was previously installed. -
Page 19: Channel Information
5.5 Channel Information Every time you change channels, you will receive program information for a few seconds. While watching the channel you can see the current channel information at anytime by pressing the INFO key on the RCU. Note: Channel information will be displayed for 6 seconds by default and will disappear. -
Page 20: Favourite List
5.9 Favourite List To create a favorite group list press FAV key on the RCU. You can access the next favorite group when you press FAV key again. The method to group favorite channels is explained in the Favorite Channel. Channel Manager The STB provides one of the most powerful channel managing functions in the world. -
Page 21: Move Channel
How to edit the name of a Favorite group 1.In the favorite mode, press MENU key on the RCU then the command box will be displayed on the screen. 2.Select “ Rename Favorite group” in the command box. 3.You can edit the name by using the keypad. 6.3 Move Channel In the TV channel manager page, press Move key (Yellow color key) on the RCU. -
Page 22: Sort Channel
6.7 Sort Channel In the Main Page, press MENU key on the RCU, and select Sort on the com- mand menu. This Sort menu has a sub command and it allows you to sort the channels, as you like. You can sort the channels by Favorite, Lock, Scramble, SAT name and CH name. -
Page 23: Timer
9. Timer You can adjust the real time as well as you can program the timer in various ways. This function is one of the strong points of the unit. 9.1 Time Adjust Usually you get the information real time from the satellite automatically but sometimes they transmit wrong information. -
Page 24: Menu Tree Of Stb
11 Menu Tree of STB First Time Installation Welcome Menu System Setting User Installation User Installation Language Antenna Setup Channel Search PICTURE Timer Channel Search Time Adjustment Search 1 Sat/TP/Network Menu Navigation Receiver Information Product Sw Version Main Menu Hw Version Channel Manager Program Guide Timer... - Page 25 Antenna Setup Help Main Menu Antenna Setup Satellite Channel Manager Antenna Latitude Program Guide Type Longitude Timer Satellite User Installation 1. Compute LNB Type Receiver Information LNB Freq.1 Compute LNB Freq.2 Azimuth 0/12V Volt Elevation 22 KHz Tone User Installation DiSEqC Factory Default C/Ku band control...
-
Page 26: Technical Specification
12 Technical Specification TRANSMISSION STANDARDS DVB, MPEG-2 INPUT/ DEMODULATION Connector Type 2X F Type, 3/8-32UNEF-2A (1 input/1 loop through) Input Frequency 950 to 2150 MHz Signal Input level -65 to – 25 dBm Band Switch control 22 KHz LNB Supply 13.0 + 0.5 V / 18V + 0.7 V, max 400 mA Demodulation Type QPSK / FEC Coding (DVB prETS 300 421) - Page 27 AUDIO/ VIDEO PROCESSING Audio Decompression MPEG-1 layer I and II / Musicam Audio Outputs Stereo Channel/Dual Mono/Joint Stereo/ Mono Video Decompression MPEG-2 Main Profile @ Main Levels With Letter Video buffer 64 Mbits of SDRAM is provided Data rate up to 15Mbits/s (Max. burst rate: 228 Mbits/s) Video output PAL-25 frame @720 x 576 NTSC-30 frame @720 x 480...
- Page 28 MICROPROCESSOR Microprocessor STMicroelectronics STi5518 Clock frequency 81MHz SDRAM Memory 8Mbyte Flash memory 2Mbyte PHYSICAL CHARACTERSTICS Front Panel Keys 6 Keys Indicators Power on/off Remote control input Infra-red receiver Display 4Digit (7Segment) Rear Panel Connectors 1 LNB Input / 1 Loop through output (2F-type) 2 x Scart (TV/VCR) 1 x 0/12 Volt (RCA) 2 x Audio L/R (RCA)
-
Page 29: Trouble Shooting
13 Trouble Shooting Problem Possible Causes What To Do The display on the front Main cable Check that the main cable is panel does not light up. connected. plugged into power socket. No sound or picture, but The unit is in standby Press the standby button.
Need help?
Do you have a question about the TVS 4600 and is the answer not in the manual?
Questions and answers