Summary of Contents for Omron ORI-025
- Page 1 ENGLISH IRON Model: ORI-025 http://www.orion.ua...
- Page 2 Dear Customers, Thank you for buying ORION products! Welcome to use! Read the instructions for use carefully before using the appliance and save them for future reference. IMPORTANT SAFEGUARDS 1. Before connecting the appliance check that the voltage indicated on the type plate corresponds to the mains voltage in your country.
- Page 3 DETAILS 1. Spray nozzle 7. Cord sleeve 2. Water inlet cover 8. Beaker 3. Steam control knob 9. Temperature control knob 4. Spray button 10. Self clean button 5. Burst steam button 11. Water tank 6. Pilot light cover 12. Soleplate HOW TO USE Note: Remove any labels, stickers or protective foil that may be attached to the body or...
- Page 4 Setting the temperature Fabric Temperature control NYLON/ACRYLIC/ACETATE SILK/RAYON/POLYESTER WOOL/COTTON LINEN 1. Stand the iron on its heel and plug the power cord into wall socket. 2. Turn iron temperature control knob until desired fabric/temperature setting. We recommend using the above table as a guide. 3.
- Page 5 Note: Only use the steam push button when the steam iron has reached the steam or maximum temperature. Do not press this burst steam button more than 3 times at once. For optimal steam output, leave an interval of at least four seconds between pressing the burst steam button.
- Page 6 To let the iron heat up again: 1. Pick up the iron or move it slightly. 2. The auto-off pilot light stop flashing (or the buzzer will stop beeping). if the temperature of the soleplate has dropped below the set ironing temperature, the temperature pilot light will turn on.
Need help?
Do you have a question about the ORI-025 and is the answer not in the manual?
Questions and answers