Chapter 2 Installation
2.1
Package Contents
Make sure that the package contains the following items. If any of the listed items is
damaged or missing, please contact your distributor.
One Wireless Controller
Two mounting brackets and
the fittings
2.2
Safety Precautions
To avoid any device damage and bodily injury caused by improper use, please observe
the following rules.
Safety Precautions
■
Keep the power off during the installation.
■
Wear an ESD-preventive wrist strap, and make sure that the wrist strap has a good skin
■
contact and is well grounded.
Use only the power cord provided with the device.
■
Make sure that the supply voltage matches the specifications indicated on the rear
■
panel of the device.
Ensure the vent hole is well ventilated and unblocked.
■
Do not open or remove the cover of the device.
■
Before cleaning the device, cut off the power supply. Do not clean it by the waterish
■
cloth, and never use any other liquid cleaning method.
One Power Cord
This Installation Guide
Note:
Here we take AC500 as an example. The package of AC50 doesn't include
mounting brackets and the fittings.
Wireless Controller
Installation
05