Laser Pegs 9100 Power Block Car Series Model Instructions

Please read this manual before you begin!
9100
Failure to follow this manual's instructions may
result in damage to the Power Base and/or Laser
Pegs®. Not adhering to these instructions will
POWER BLOCK
void the manufacturer's warranty. Packaging
CAR SERIES
must be kept because it contains important
information.
WARNING:
For Boys And Girls
CHOKING HAZARD
- Small parts.
Ages 5 And Up
Not for children under 3 yrs.
8 Models+
Do not submerge in water.
Any creation you can build
LIGHTED
MOBILE POWER BLOCK™ SET
INCLUDES:
• 83 Construction Parts
• 4 Tire Pegs
• 2 Square M-M Pegs
Construction Compatible
• 1 Mobile Power Block™
Compatible with other construction kits
Requires 3 AAA Batteries
Batteries NOT
EN71, RoHS COMPLIANT
Included
This product complies to
all safety requirements
of ASTM F 963
MODEL INSTRUCTIONS
All additional model instructions can
be downloaded at www.LaserPegs.com
Laser Pegs® Parts List
x2
SQUARE
M-M PEG
MOBILE POWER BLOCK™
x4
Allows you to connect to
both Laser Pegs® and other
construction kits.
TIRE PEG
Color Each Laser Peg® is color coded on the circuit board inside
Code each shape.
Construction Parts List
x4
x2
x5
x4
x5
x4
x2
x6
x1
x2
x2
x2
x5
x2
x2
x3
x5
www.LaserPegs.com
This manual is copyright and cannot be reproduced or used online without Laser
Pegs®Ventures LLC permission. Copyright 2013 © All Rights Reserved US Patent
#7,731,558 Additional Global & Multiple Patents Pending. Laser Pegs® Ventures
LLC. 8304 Consumer Ct., Sarasota FL 34240. Contact: Support@LaserPegs.com
Connecting Pegs
To construct with Laser Pegs®, slide two pieces together to form
a connection. Slide each piece on and off smoothly.
POWER BLOCK
The Power Block is a Power Base that allows you to build with Laser Pegs®
and construction parts to build models that light up. It is battery operated.
(BATTERIES NOT INCLUDED.)
Laser Pegs®
Construction Part Connections
Connections Allows you to connect to other
construction kits.
Allows you to construct
with Laser Pegs®.
Power
Switch
Requires 3-AAA Batteries
Move the Power Switch to
(Batteries Not Included)
cycle through the Power
Block light settings.
OFF/ON/FLASH
LIGHT SETTINGS
x2
OFF - Turns lights OFF
x10
ON - Turns lights ON
FLASH - Makes lights FLASH
x6
x5
x4
WARNING! Each Laser Peg® draws current from the batteries. Therefore, the more
pegs you use, the quicker you will deplete your battery power! As the power
weakens, the current will slowly fail and some Laser Pegs® will illuminate (typically
the reds and yellows) and some won't. When the Laser Pegs® dim, the Laser Pegs®
are not broken, they just need stronger batteries.
You have 2 simple options...
1. Change the batteries.
2. Use high quality batteries. They will last a little longer, but they will still deplete
rapidly the more Laser Pegs® you connect!
Replacing Batteries
1. Remove Screw.
2. Lift off Battery Compartment Cover.
3. Place three (3) AAA batteries in the correct
position - as displayed inside of the
Power Block.
4. Replace Battery Compartment Cover and
Screw.
5. Move Power Switch setting to
OFF/ON/FLASH.
6. Do not mix old and new batteries.
7. Do not mix alkaline, standard (carbon-
zinc), or rechargeable (nickel-cadmium,
NiMH) batteries!
8. Exhausted batteries are to be removed
from the power base.
9. Never connect more than 150 Laser Pegs® at
one time!
10. Non-rechargeable batteries are not to be
recharged.
11. Rechargeable batteries are only to be
recharged under adult supervision.
12. Rechargeable batteries are to be removed
from the toy before being recharged.
13. Batteries are to be inserted with the
correct polarity.
14. The supply terminals are not to be short-
circuited.
Remove the Phillips head screw
with a 4mm screw driver.
Requires 3-AAA Batteries
Batteries NOT
Included
Tire
Battery
Compartment
Axle Peg
POWER BLOCK
Use the Laser Pegs® Square M-M Peg to attach
the Tire Pegs to the Power Block™.
Laser Pegs® Square M-M Peg
MOBILE POWER
BLOCK™
Screw
Battery
Compartment
Cover
Connecting the Laser Pegs® Tire to the Axle Peg
Place Axle Peg
through the Tire
™
Tire Peg
Battery
Compartment
Requires 3-AAA Batteries
Tire Peg
AVOID DAMAGE TO PEG HOLES
*To avoid short-circuits, keep metal objects and
other unauthorized materials from obstructing
the peg holes.
Never connect more than 150 Laser Pegs®
to the Power Block at one time.