Sending A Data Or Fax Call; Receiving A Data Or Fax Call - Motorola V188 Manual

Sending a Data or Fax Call

Use this procedure to send data or a fax from a connected
computer or hand-held device.
Action
1 Make sure that the phone is connected and
2 Open the application (such as dial-up-networking
3 When the transfer is complete, end the call from

Receiving a Data or Fax Call

Use this procedure to transfer data or a fax to a connected
computer or hand-held device.
Transferring the Data or Fax
Your phone notifies you when the data or fax call arrives,
and transfers the call to the connected device. Use the
application running on the device to answer the call.
Ending the Data/Fax Connection
When the data or fax transfer is complete, end the call
from the connected device to close the connection.
150
powered on.
or fax) on your computer, and place the call
through the application.
Note: You cannot dial data or fax numbers
through your phone's keypad. You must dial
them through your computer.
the connected device to close the connection.