Selecting a Device from External Sources
Viewing Pictures from External Sources
English-44
Your set enables you to choose which audio/video signals are output to
the external connector.
1
Press the MENU
Press the ENTER
Result:
The options available in the Input group are displayed.
2
Press the ENTER
Result:
The options available in the Source List menu are
displayed.
3
Select the required device by pressing the
Press the ENTER
4
Repeat step 1.
Press the
or
Press the ENTER
Result:
The options available in the Edit Name menu are
displayed.
5
Select the device that you wish to edit by pressing the
The following options are available:
Ext.1 - Ext.2 - AV -
6
Press the ENTER
7
Select the required device by pressing the
The following options are available:
---- - VCR - DVD - Cable STB - HD STB - Satellite STB -
AV Receiver - DVD Receiver - Game - Camcorder -
DVD Combo - DHR - PC
8
When you are satisfied with the setting, press the MENU
to return to the previous menu or press the EXIT button to return to
normal viewing.
Once you have connected up your various audio and video systems,
you can view the different sources by selecting the appropriate input.
1
Check that all the necessary connections have been made.
2
Press the SOURCE button.
Result:
The edited device and audio status are displayed on
top-left of the set.
3
Press the SOURCE button until the required input source is
selected.
If you change the external source while viewing, pictures
might take a short period of time to be switched.
button.
button to select Input.
button.
button.
button to select Edit Name.
button.
S-Video
- DVI - PC
button.
or
or
button.
or
button.
button repeatedly.
button