Set Up The Option Code - Samsung AS18A0RCF Service Manual

AS18A9(0)RCF SM_E_15775 3/10/05 7:15 PM
Ι Ι Ι Ι

Set up the option code

The method for setting up the model option with the remote control
N It is necessary to set up option codes after replacing the main PCB with service parts.
Make sure that you can set up option codes of the remote control after replacing the main PBA.
Otherwise, the unit won't be working properly and all LED lamps on display will be flickering.
Step 1
Preparing for the remote control to the main PCB option set.
1. Remove the battery from the remote control.
2. Press the temperature button simultaneously and insert the battery again.
3. Make sure the remote control display shown as
Step 2
Preparing for the remote control option set.
N N N N o o o o t t t t e e e e
In case that the wrong letter has been selected; continue to press the button until the
correct letter appears.
12
Page 12
1. If the number " "appears on the display, proceed to the second stage.
2. Every time you press the 1) and 7) button, " " and " " continue to appear.
3. Every time you press the 2), 3), 4), 5), 6), 8), 9), 10), 11), 12) button, the number increases
from ~ ( , , , , , , , , , ) and , , , , ,
1) If the first number is
2) When pressing the
3) When pressing the
4) When pressing the
5) When pressing the
6) When pressing the
in order.
, it is correct. Otherwise, press the
until appears.
button
button
button
button
button
.
button
~ on the display, select one of them.
~ on the display, select one of them.
~ on the display, select one of them.
~ on the display, select one of them.
~ on the display, select one of them.