Ya-man STA-170 Instruction Manual

Rei beaute

Advertisement

Instruction Manual
Rei Beauté

Table of Contents

Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Use in Foreign Countries . . . . . . . . . . . . . . . . . . . . . . . 7
Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Treatment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
How to Use each Treatment Mode . . . . . . . . . . . . . . . 13
After Treatment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Frequently Asked Questions (FAQ) . . . . . . . . . . . . . . 23
After Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Before using this product, please read these instructions
carefully.
Refer to the Safety Precautions section for important information.
Keep this Instruction Manual for future reference.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the STA-170 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ya-man STA-170

  • Page 1: Table Of Contents

    Instruction Manual Rei Beauté Table of Contents Safety Precautions ......1 Use in Foreign Countries ..... . . 7 Product Description .
  • Page 2: Safety Precautions

    Safety Precautions Please read all instructions carefully for safe and proper use. Use only as directed. Immediately discontinue use if any malfunction or unusual reaction to treatment occurs. Precautions listed in the instruction manual are very important. For your safety, please follow them carefully. Precautions are classified as WARNING or CAUTION in order to clearly specify the level of danger and possible injury or damage that may occur if the device is misused.
  • Page 3 WARNING Do not use under any of the following conditions as this may cause malfunction of medical devices: Do not use in conjunction with any medical electronic equipment such as a pacemaker, oxygenator, electrocardiograph, etc. Consult a doctor or the manufacturer of the medical electronic equipment before using this device.
  • Page 4 WARNING Do not use the device for Do not use the device near extended periods. flammable substances or (Not for professional use.) objects such as alcohol, Allow at least 10 minutes interval t h i n n e r , b e n z e n e , n a i l a f t e r 2 0 m i n u t e s o f u s e .
  • Page 5 WARNING Do not allow the main unit, Do not allow children or AC adapter, or cord to get disabled persons to use wet. the device unattended. Do not use or store near If you are underage, do not water or humid places such u s e w i t h o u t a p a r e n t ' s as bathrooms as this may permission and only use...
  • Page 6 CAUTION Make sure the treatment D o n o t a p p l y f l a s h o n w i n d o w i s n o t b r o k e n , clothes, objects, or your distorted, discolored, or h e a d h a i r a s t h i s m a y...
  • Page 7 CAUTION Always shave the treatment Avoid sun or UV exposure area before applying flash to areas that have been t r e a t m e n t . I f y o u a p p l y treated for at least 24 hours flash to skin with long hair after treatment.
  • Page 8: Use In Foreign Countries

    Use in Foreign Countries WARNING Use at AC100-240V only to avoid a potential fire or electrical shock hazard. Be sure to check the plug shape and the voltage before using. Using this device with an improper plug or at the incorrect voltage may cause overheating, fire, or malfunction.
  • Page 9: Product Description

    Product Description Main Unit Cool Plate Standby Lamp (For skin cooling) Glass Tube (Flash) Vents * Do not block Treatment Window (Shown in grey) Filter * Yellow Clear Glass Emission Button AC Adapter Socket Accessories Face Attachment AC Adapter AC Adapter Adapter Plug * Design and specifications of the main unit and accessories are subject to change for improvements without prior notice.
  • Page 10: Before Use

    Before Use Operation Panel Level Indicator Lamp Level Up Level Down Button Emission Button Button Mode Lamp Standby Power / Cool Button Lamp Power / Cool Button ON: Press and hold (approx. 3 sec.) to turn ON (Level 1 lamp will be solid green) COOL: Press (approx.
  • Page 11 Preparing for Treatment Follow these instructions before every treatment for best results. Shave the treatment area with your own shaver. Unwanted hair or debris on the skin surface may cause burns. Do not pluck or wax unwanted hair on areas you wish to treat. Make sure the attachment and treatment window are clean, free of dirt and debris, undamaged, and in good condition.
  • Page 12 Set the Flash Level Set to a level at which you feel a mild sensation of warmth or heat. Do not use at a level that is intolerable. Adjust the Flash level according to the treatment area. Do not set the flash level high for those with dark skin tone or recently tanned skin.
  • Page 13: Treatment

    Treatment Treatment Steps < Body Care > Shave → ① Apply flash treatment → ② Cool down the treatment area using Cool mode ③ NOTE: If unwanted hair is longer than 1mm, always shave first before performing flash treatment. < Face Care > Attach Face Attachment and then perform flash treatment →...
  • Page 14: How To Use Each Treatment Mode

    How to Use Each Mode How to use Flash Mode Plug the AC adaptor into the adapter plug socket and then into the wall socket. Press and hold the Power/Cool button (approx. 3 seconds) to turn on the power When using an attachment, first turn on the power and then attach the attachment.
  • Page 15 Move the treatment window to the next adjacent area after each flash to continue applying treatment to the entire area. Move to the next area after each flash even when using repeat flash emission mode. The treatment window is the size of the area that will receive each flash emission.
  • Page 16 < About Single/Repeat Emission Mode > If you continue to press the emission button, the flash will repeatedly emit automatically each time the device is ready to flash again. Glide the treatment window (without lifting) to a new area after each flash. Do not use in dark areas;...
  • Page 17 How to use the Cool Mode Cool down the treatment area after a flash treatment. Press Power/Cool button for approximately 1 second to switch to Cool mode while the device is turned on. The Mode lamp will turn on solid blue. Apply Cool Plate to the treatment area.
  • Page 18 Tips for Each Treatment Area Follow these tips for application to different treatment areas: Underarm Treatment Remove all cosmetics, antiperspirants, perfumes, and lotions before treatment. Use a mirror for an easier view of the treatment area. Stretch the skin with your fingers where skin is loose.
  • Page 19 About the Face Attachment Proper treatment on the face or small areas can be performed by attaching the face attachment to the device. The Face attachment is always recommended for use on facial hair. Attaching and Removing Face Attachment Always attach or remove the Face attachment while the power is ON. Fasten the Face Attachment to the treatment window as shown in the figure below.
  • Page 20: After Treatment

    After Treatment How to Clean Attachment and Main Unit Treatment window and cool plate must be cleaned every time after each treatment. Clean the main unit regularly to avoid malfunction or operation failure. Always turn off the power and unplug the AC adapter from the main unit and from the wall socket before cleaning.
  • Page 21 Unplug the AC adapter from the wall socket when cleaning. Cleaning with the adapter attached may cause electrical shock hazard, short circuit, or fire. Keep water from entering inside the unit as this may cause WARNING electrical shock hazard, short circuit, or fire. Never use solvents such as alcohol, thinner, benzene, or nail polish remover.
  • Page 22: Troubleshooting

    Troubleshooting Checklist for Possible Problems Symptom Possible Cause Solution AC adapter is not Connect AC adapter connected to main to main unit and plug → → unit or wall socket into wall socket Power does not turn on Press and HOLD You did not press the Power/Cool Power/Cool to turn...
  • Page 23 Symptom Possible Cause Solution Press Power/Cool The treatment is set button for 1 sec. to → → to Cool Mode switch to Flash mode Flash does not emit You are using it in a Use in an area with any light →...
  • Page 24: Frequently Asked Questions (Faq)

    FAQ (Frequently Asked Questions) What is Flash? Intense, instant light from a Xenon flash lamp. Will the flash feel You will feel a mild heat when flash is used but it hot, hurt, or will my does not affect the skin. skin get red? Possible reasons the flash may feel hot is because a longer hair was treated, or you have...
  • Page 25: After Service

    After Service About Disposal Follow your local government rules for proper disposal of this product. Recommended Skincare Product Platinum Esthe RB (Sold Separately) Pearl Skin Gelée Lotion with SPF Soybean extract and moisturizing ingredients will lead to smooth and moisturized pearly skin. Suitable for use after hair removal treatment.
  • Page 26 STA170-1-001E...

Table of Contents