Page 1
OPERATION MANUAL EST 246 air spray gun II 2 GX hese spray guns have been engineered for professional ead and undersTand This operaTion manual before operaTing doing any service or mainTenance procedure ncorrecT use may resulT in serious personal injury or...
Page 2
® EC-DECLARATION OF CONFORMITY RODUCT Low pressure manual spray gun EST 116, EST 216, EST 246 and their modifications — ARIANTS Liquid paint coating SAGE OMPLIES WITH European directives 2006/42/EC; 94/9/EC; 2003/10/EC; 2002/44/EC TANDARDS USED EN ISO 5349-1; EN ISO 12100; EN 13463-1; EN ISO 13732;...
TABLE OF CONTENTS SAFETY REGULATIONS Vibrations and noise Work with sprayer Protection during work USE AND DESCRIPTION OF EQUIPMENT Sprayer EST 246 Air way - materials used Method of coating substance - material used Advanteges of the new sprayer TECHNICAL PARAMETERS COMMISSIONING...
Page 4
EST 246 DEFECTS AND REMOVAL PARTS SPECIFICATION Display of parts Accessories supplied with the equipment Needle sealing set - paint(ident. no. 906 765) Needle sealing set - enamel (ident. no. 906 766) Air valve set - identification number 906 552...
EST 246 SAFETY REGULATIONS For spraying and manipulation with flammable liquids, the respective standards are valid. Premises and rooms in which work with coating substances is performed must be marked and modified with respect to the class of inflammability pursuant to valid standards and regulations.
(clothes, gloves, respirators, protective masks, breathing devices, protective glasses, protective creams, etc.). USE AND DESCRIPTION OF EQUIPMENT Air sprayer EST 246 is a sprayer with a lower pressure supply of material. The sprayer has a complete stainless route for the applied material.
EST 246 ir Way materials used Body of the sprayer alloy Al with surface treatment Ni Sealing elements POM, PE, PTFE Parts stainless, brass ethod of coating substance material used Body of the sprayer tiled with stainless material AISI 304 Sealing elements PTFE (for NH);...
EST 246 TECHNICAL PARAMETERS Maximum permitted input overpressure of air .... 6 bars Working pressure of air – recommended* ..2,5-3,5 bar Maximum pressure of applied material .......6 bar Consumption of air .........300-420 Nl.min Range of the output of sprayed coating substance* .....
» over 10 metres with the nominal clearance of 9.5 mm ptions for selecting the supply of painting substances The construction of the EST 246 A sprayer has the option to select the supply: » lower fixed supply – stainless tube with connecting threading M 14 x 1.5...
» activation of air before opening the outflow of the coating substance Reproduction of the quality of EST parts ensures that during standard replacement of the jet system, the lead is permanently set, it is not necessary to be adjusted.
EST 246 regulation wheel. By turning to the left, the supplied volume of air is increased and the beam is spread. egulation of the air supply into the sprayer This regulation (17) is located in the upper axis of the sprayer and enables throttling of the...
Page 12
EST 246 remove from the sprayer. (fig b) Using the assembly drift press sealing U1 (13) from the dismantled air regulation. Insert into the regulation the drift (36) and by screwing the stop bolt (20) push out the sealing (13) from the regulation.
EST 246 MAINTENANCE AND CLEANING rinciples for maintenance and cleaning » Do not leave dried substances in the sprayer or on the surface. Removing is difficult (if it is dried) and there can be damage to the smooth area. ATTENTION Do not use metal pieces for cleaning!!! »...
EST 246 ersions of felxible supply rder hose set 8/6 (Fig. 1) 906 876 the hose is not included in the delivery hose set 6/4 (Fig. 2) 906 883 the hose is not included in the delivery Fig. 1 Fig. 2 ther optional accessories »...
EST 246 TESTING OF PRODUCTS » Functional and pressure tests are performed for each product in the manufacturing plant. PACKING OF PRODUCTS » According to individual parts for delivery. DISPOSAL » After termination of the service life of the parts or the sprayer, after cleaning the sprayer can be put into sorted waste.
EST 246 DEFECTS AND REMOVAL efects aeson emoVing ir floWs from nozzle » empty pressure vessel on the » doplnit nátěrovou hmotu painting substance » untightened nozzle on the » correctly tighten nozzle body of the sprayer » damaged seal in the body of »...
PARTS SPECIFICATION osition dentification number uantity Air cap Specification according to the table “Combination of nozzle Nozzle set sets“ Body EST 246 — Not delivered “O“ ring 33,3 x 1,6 105 081 Lever 806 510 Air threads 806 687 Holder...
Page 24
Code No. 513/91 Coll. as amended pursuant to Section 422 – 442. The warranty period for the products of the EST + a.s. company is 36 months from the date of agreed sale supply, if not agreed otherwise in the business contract.
Need help?
Do you have a question about the 246 and is the answer not in the manual?
Questions and answers