Christopher Ward C8 UTC Worldtimer Owner's Handbook Manual page 9

How to operate your C8 UTC Worldtimer
Setting the UTC hand
How to use the UTC hand if you're travelling
Set the time in your new destination by pulling the
top crown (A) into position 3 and move the hour/
minute hands until they indicate the desired time.
Push crown into position 2 and wind, clockwise,
the UTC hand around the inner 24-hour dial ring
until you have the right time at home. E.g If you're
travelling from London at 12:10 to New York (Figure 1),
Figure 1
8
3
2
A
B
you would turn the hour/minute hands to 7:10
(NY time is five hours behind London) and wind the
UTC hand around to the 12:00 position (Figure 2).
Once set, it means that, for example, you can ring
your friends and family without waking them in
the middle of the night.
Figure 2
A
B