Summary of Contents for Grundig PSAP 3000
- Page 1 PROFESSIONAL SATELLITE CASSETTE ANALOGUE PAL PSAP 1000 PSAP 3000 PSAP 4000 PSAP 5000 Grundig SAT Systems...
-
Page 2: Table Of Contents
CONTENTS ________________________________________________________________________ General Scope of delivery Technical data The SAT TV receiver modulators PSAP 1000, PSAP 3000, PSAP 4000 and PSAP 5000 Installation, Connecting Installing modulators into the Headend station The Menu Guide The menu guide at a glance Settings Programming the modulator Selecting the modulator (Box no.) and channel line A or B... -
Page 3: General
GENERAL ____________________________________________________________________________ Scope of delivery 1 SAT TV receiver modulator PSAP 1000, PSAP 3000, PSAP 4000 or PSAP 5000 1 RF connecting cable 1 user manual, 1 technical evaluation Technical data This product conforms with the requirements of the 73/23/EC and 89/336/EC guidelines of the European Council. - Page 4 GENERAL ___________________________________________________________________________________ The receiver modulators PSAP 1 000 VHF, PSAP 3000 VHF, PSAP 4000 Hyperband and PSAP 5000 UHF With each of these SAT TV receiver modulators, it is possible to convert two TV satellite signals of equal polarization (horizontal or vertical) from the 1st SAT IF range (950-2150 MHz) into the TV bands I to band V.
-
Page 5: Installation, Connecting
Note: The "Retrofit coaxial socket " can be ordered from your local SAT/BK service office from the GRUNDIG AG in Nürnberg/Germany. – Telephone: ++49(0)911/703 87 06 – Telefax : ++49(0)911/703 92 10 Follow these steps: Undo the fixing screws of the mounting frame, then fit the cassette into a free slot and refit the fixing screws. -
Page 6: The Menu Guide
Press the key to save all settings and to return to the access menu. The following examples show the programming of the SAT receiver modu- lator PSAP 3000 VHF; the output channels incl. can be selected. V.19 BE–Remote... -
Page 7: The Menu Guide At A Glance
THE MENU GUIDE ___________________________________________________________________ continued MULTI MULTI MULTI select audio Bx 3A AUDIO–IN: Bx 3A AUDIO–IN: Bx 3A AUDIO–IN: mode (stereo, 7.02 MHz MAIN 7.02 MHz SubMONO 7.02 MHz STEREO mono, dual) – Bx 3A AUDIO–IN: Bx 3A AUDIO–IN: Bx 3A AUDIO–IN: enter audio 7.02 MHz... -
Page 8: Settings
– Various audio settings – Volume adjustment Note: The following examples show the programming of the SAT receiver modula- PSAP 3000 VHF; the output channels can be adjusted from including to C12. Select modulator (Box no. and Line A or B) A few moments after switching the Headend station on, the access menu, e.g. - Page 9 SETTINGS __________________________________________________________________________________ Enter the input frequency Press the button. The » INPUT: « menu appears in the display. MODE Use the button to move the cursor to the desired position, and then use – button to enter the input frequency. Meaning of symbols: –>...
-
Page 10: Selecting The If Bandwidth
SETTINGS __________________________________________________________________________________ Select the IF bandwidth (threshold) The IF bandwidth should only be changed if reception is poor. Press the button. The »TUNER:« menu appears in the display. MODE Bx 3A TUNER: – Use the button to adjust the picture and sound to suit your taste wide (wide, narrow, DX). -
Page 11: Adjusting The Volume Level
SETTINGS __________________________________________________________________________________ Adjust the volume level It is possible to adjust different volume levels of the programmed stations to each other. The adjustment is possible in six volume steps. Press the MODE button. In the display appears, for example, the menu »Bx 1A AUDIO-OUT:«. -
Page 12: Important Information
IMPORTANT INFORMATION _________________________ The VPS code TV programmes are broadcast in the audio modes mono, stereo or two-channel sound (dual). Many TV stations identify these different audio modes by the signal (VPS = Video Programme System). The SAT receiver modulator recognizes this signal and automatically switches to the corresponding audio mode. -
Page 13: Accessories
General The decoder retrofit kit serves for retrofitting also analog DNS UNIVERSAL GRUNDIG PROFI cassettes PSAP 1000, PSAP 3000, PSAP 4000 PSAP 5000. Important: Contrary to the indications in the mouniting instructions of the retrofit kit, the adapter plate supplied is not required for the installation into this cassette. - Page 14 ACCESSORIES ___________________________________________________________________________ Feeding the picture/sound signals of external equip- ment permanently into the signal path Fit the decoder module and the required flat ribbon cable. In addition you must cut the three wire bridges BR 1068 (Audio, right), BR 1093 (Audio, left) and BR 1094 (Video), for channel LINE A cut the three wire bridges BR 2068 (Audio, right), BR 2093 (Audio, left)
- Page 15 ACCESSORIES ___________________________________________________________________________ Video-controlled memory If external picture/sound signals are to be permanently fed in (without switching voltage), we recommend to feed in the picture/sound signals via pin 10 of the Sub-D socket. In this case, the picture/sound signals are fed in a clamped and controlled way into the modulator.
- Page 16 ACCESSORIES ___________________________________________________________________________ Installing the decoder retrofit kit into the cassette Note: Two decoder retrofit kits can be installed into each of the two twin SAT cassettes: one for channel LINE A and one for channel LINE Remove the cover from the top of the cassette. Break out the corresponding pre-punched opening in the front side of the cassette.
-
Page 17: Blanking
BLANKING __________________________________________________________________________ Blanking the picture signal With pure sound transmissions (e.g. in hotel systems), the picture signal can be blanked (dark picture). Remove the cover from the bottom of the cassette. Resolder the two chip bridges (for channel LINE A) and (for channel B) on the solder side of the cassette (see Figure below). -
Page 18: C-Band Reception
C-BAND RECEPTION ________________________________________________ C-Band reception With an appropriate satellite aerial and LNB this cassette can also receive C-band stations (4 GHz). For these stations, a negative video polarity must be selected. Remove the cover from the bottom of the cassette. Resolder the two chip bridges (for channel A) und... - Page 19 GRUNDIG-SERVICE __________________________________________________ CCIR-Kanalraster/CCIR Channel Steps/Pas de canaux CCIR Bild-/Ton-Abstand: 5,5 MHz / Video-audio distance: 5.5 MHz / Ecart vidéo/audio: 5,5 MHz Kanal Freq. BT in MHz Kanal Freq. BT in MHz Kanal Freq. BT in MHz Kanal Freq. BT in MHz Chann.
- Page 20 GRUNDIG-SERVICE __________________________________________________________________ OIRT-Kanalraster/OIRT Channel Steps/Pas de canaux OIRT Bild-/Ton-Abstand: 6,5 MHz / Video-audio distance: 6.5 MHz / Ecart vidéo/audio: 6,5 MHz Kanal Freq. BT in MHz Kanal Freq. BT in MHz Kanal Freq. BT in MHz Kanal Freq. BT in MHz Chann.
- Page 21 GRUNDIG-SERVICE __________________________________________________________________ China-Kanalraster/China Channel Steps/Pas de canaux en China Bild-/Ton-Abstand: 6,5 MHz / Video-audio distance: 6.5 MHz / Ecart vidéo/audio: 6,5 MHz Kanal Freq. BT in MHz Kanal Freq. BT in MHz Kanal Freq. BT in MHz Kanal Freq. BT in MHz Chann.
- Page 22 GRUNDIG-SERVICE __________________________________________________________________ USA-Kanalraster/USA Channel Steps/Pas de canaux en E. U. A. Bild-/Ton-Abstand: 4,5 MHz / Video-audio distance: 4.5 MHz / Ecart vidéo/audio: 4,5 MHz Kanal Freq. BT in MHz Kanal Freq. BT in MHz Kanal Freq. BT in MHz Kanal Freq.
- Page 23 GSS Grundig SAT Systems GmbH • Beuthener Str. 43 • D-90471 Nürnberg • http://www.gss.tv...