1. Manuals
  2. Brands
  3. VARIOUEST Manuals
  4. Printer
  5. Perfecta 3600STP
  6. Quick start & introduction

VARIOUEST Perfecta 3600STP Quick Start & Introduction

Poster design system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Perfecta™ 3600STP
Poster Design System
Quick Start & Introduction

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Perfecta 3600STP and is the answer not in the manual?

Questions and answers

Summary of Contents for VARIOUEST Perfecta 3600STP

  • Page 1 Perfecta™ 3600STP Poster Design System Quick Start & Introduction...

  • Page 2: Front Panel

    Perfecta 3600STP Quick Start Front Panel The front panel gives you complete control of your printer. Dynamic information in central area displays current activity. Dashboard (swipe down from top) displays Home screen icons. Fixed icons on left and right (normally not all displayed at Introduction once).
  • Page 3 Install Ink 2. Remove blue paper stop from end of spindle and slide on new roll. Orient paper as shown. 3. Replace blue paper stop on open end of spindle and push toward roll. CAUTION! CAUTION! Do not remove an ink cartridge while printing. Make sure you insert the ink cartridge into the slot with the same colored letter as the cartridge you are installing.
  • Page 4 Use the Multi-Sheet Tray Connect DC2300 to Perfecta 3600STP Printer Before printing from the Design Center to the Perfecta 3600STP, you must first set If a roll or single sheet is already loaded, you will have to touch Unload Roll and up the Design Center software and the Perfecta 3600STP printer.
  • Page 5 Note: The print will automatically size itself to how it was designed. To print on the size of the loaded paper, you must select it. 5. When done, touch Print. The document will be sent to the Perfecta 3600STP. ®...
  • Page 6 4. When the Wi-Fi Direct Settings change to Automatic, touch to display the Info menu with a list of available printers. Note the password for later. 8. When done, touch Print. The document will be sent to the Perfecta 3600STP. ® Page Perfecta™...
  • Page 7 Setup Scan-to-Print Scan-to-Print Scan-to-print is performed from the Copy tab. The printer first scans the original into Note: Steps 1-4 are a one-time setup. Once done, scan to print will work resize to the memory, then prints the scanned image. Do not feed the scanner while printing. loaded paper size.

  • Page 8: Technical Support

    Print/Scan to USB Technical Support You can print a file from a USB thumb drive connected to the Perfecta 3600STP or For technical assistance, please contact your authorized VariQuest dealer or the save a scanned image from the Perfecta 3600STP to a USB flash drive.

Table of Contents