Table of Contents
Advertisement
3G-SDI Level A_B
Flip/Mirror
Ext Sync H-phase Adjust
Video Output Pattern
Network
Setting to Factory
36.
Select the monitor signal with the 3G-SDI (1080 50p/60p)
interface.
(Level A, Level B)
1080 50P/60P transmission standard:
The SMPTE 425 standard specifies Level A direct mapping and
Level B Dual-Stream mapping.
This product accepts both settings.
according to the environment to be used.
Flip or mirror videos.
Normal
Flip
Mirror
Flip & Mirror
Adjustment of H phase of the external synchronizing signal.
Set the video test pattern.
(Live, Color bar, Gray Scale, Cross Line)
Set the network
Item
IP Address
Subnet Mask
Default Gateway
It allows you to reset all setup menu items to the factory
settings.
This function requires a reboot of the CCU.
The message "Proceed" momentarily appears on the monitor.
It goes to no video signal and then will go back to normal.
You can choose one
No flip or mirror
Reverse up to down
Reverse left to right
Reverse up to down and
left to right
Default value
192.168.1.100
255.255.255.0
192.168.1.254
MCM2082201-01
Advertisement
Table of Contents
