CAUTION
Handling the camera sensors (if equipped)
■
Observe the following to ensure that the PCS functions effectively:
Keep the windshield clean at all times.
●
PCS effectiveness may be reduced due to the presence of raindrops, condensa-
tion, ice or snow on the windshield.
Do not subject the camera sensor to a strong impact or force, and do not disas-
●
semble the camera sensor.
Do not change the installation position of the camera sensor, or remove and rein-
●
stall it. The direction of the camera sensor is precisely adjusted.
When the windshield fogs up, use the windshield defogger to dry the windshield.
●
During cold weather, using the heater with air blowing to the feet may allow the
upper part of the windshield to fog up, having a negative effect on the images.
Do not place anything on the dashboard.
●
Images reflected on the windshield may reduce the effectiveness of the camera
sensor.
Do not scratch the camera lens, or let it get dirty.
●
Do not attach a sticker or other items to the windshield near the camera sensor.
●
Headlights (vehicles with camera sensors)
■
Observe the following to ensure proper near-infrared ray projection:
●
• Keep the headlights clean at all times.
• The detection performance may deteriorate if the high beams are misaligned
or inoperative.
The near-infrared ray transmitters project strong energy that is not visible.
●
Although the transmitters normally turn off when the vehicle is stopped, never
look into the headlights for your safety.
LS460/LS460L_U (OM50G04U)
4-5. Using the driving support systems
305
4