Component Connection
Transmits the analog video and audio signals from
an external device to the TSP500 set. Connect
the external device and the TSP500 set with the
RCA-Component cable as shown in the following
illustration. To display images by using progressive
scan, make sure to use the component cable.
Side of the Product
(not included)
NOTE
When connecting to the AV or Component
y
y
port using the shared interface, the port must
match up to the input source. Otherwise,
noise may occur.
(not
included)
VIDEO
AUDIO OUT
AV(CVBS) Connection
Transmits the analog video and audio signals from
an external device to the TSP500 set. Connect
the external device and the TSP500 set with
the Composite cable as shown in the following
illustration.
Side of the Product
(not included)
VIDEO
OUT
AUDIO
OUT
NOTE
For AV (CVBS) connection, the red and blue
y
y
cables in a shared interface are not in use.
59
(not included)