HOW TO OPERATE THE REFRIGERATOR/FREEZER
Removal of the sliding shelf's rail
slightly raise both ends of the rail;
pull the rail completely out from the front.
To reposition the rail:
align the rail hooks with the corresponding
supports on the rack-track rail.
NOTE: Make sure that all the hooks are aligned
with the rail supports and that they are all on
the same level.
keeping the rail pressed on the supports,
push it downwards;
finally check that the rail is well fixed on the
To reposition the shelf on the rail:
firmly hold the shelf with both hands;
rarse the front side by approximately
insert both sides of the shelf in the upper run
channel of the rail;
lower the front side back to its level position.
Removal of the meat drawer
and its lid
To remove the meat drawer:
slide the meat drawer out until it stops;
raise the front side of the drawer;
slide the drawer completely out;
To reposition it, carry out the above operations
in reverse order.
To remove the lid:
raise the front side of the lid and then the
To reposition, carry out the above operations in