Setting The Digital Output; Setting The Pcm Output - Philips MX5800SA/22S User Manual

Setting the digital output

Set Digital Output according to your
optional audio equipment connections.
Follow the steps of "Using the Setup
Menu" and select :
> Digital Output
1en 1en
Digital output
Analog output
Night mode
Karaoke vocal
Speaker layout
Speakers
PCM output
Off
Select this to deactivate the digital
output.
All
Select this if you have connected the
digital output to an optional piece of
audio equipment that has a multichannel
decoder.
PCM only
Select this if the optional audio
equipment is not capable of decoding
multichannel audio. After that, proceed to
"Setting the PCM output". Once you
select {PCM only} the surround mode
will automatically change to 'STEREO'.
1 st
Off
PCM only
All
DVD Menu Options

Setting the PCM output

Set your PCM (Pulse Code Modulation)
output only after you have set the
system's Digital Output to 'PCM only'.
(See "Setting the digital output").
Follow the steps of "Using the Setup
Menu" and select :
> PCM Output
1en 1en
Digital output
Analog output
Night mode
Karaoke vocal
Speaker layout
Speakers
PCM output
48 kHz
Select this if the optional audio
equipment is incapable of processing
96 kHz digital signal input. The signal will
then be converted to a standard signal
with sampling rates of 48 kHz.
96 kHz
Select this if the optional audio
equipment is capable of processing digital
signal input with sampling rates of 96 kHz.
However, if the sound output is distorted
or there is no sound, select '48 kHz'
instead.
1 st
48 kHz
96 kHz
31