Table of Contents
Advertisement
Stringing / tuning procedure
Place the string's ball end on the bridge string
holder. Hold the ball end down with one hand
and with the other feed the string to the tuner.
The tuner's post has a slot with a hole in
the center. Put the string in that hole before
you start winding. This system avoids the
string poking out to the side of the tuner and
stabilizes the winding, giving the bass better
tuning overall.
2-4 windings around the post are ideal for
good tuning and stability.
Cut the string approximately 8 cm / 3 1/4"
behind the tuner. You'll need this excess
length for the windings around the tuner's
post.
Tighten the string while winding it around the
post. This avoids string slippage and increa-
ses tuning stability.
5
Advertisement
Table of Contents
