Table of Contents
Advertisement
Instruction Manual & User Guide
Combo Changetable
IMPORTANT: RETAIN FOR FUTURE REFERENCE.
Please read this manual in its entirety before assembling the
product and follow all instructions contained herein.
Do not use this cot if any part is Broken, Torn or Missing.
Please retain instruction manual for future reference.
Illustrations are representative only.
Design and style may vary.
An IGC Dorel brand
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Mothers choice 13208
Summary of Contents for Mothers choice 13208
- Page 1 Instruction Manual & User Guide Combo Changetable IMPORTANT: RETAIN FOR FUTURE REFERENCE. Please read this manual in its entirety before assembling the product and follow all instructions contained herein. Do not use this cot if any part is Broken, Torn or Missing. Please retain instruction manual for future reference.
-
Page 2: Table Of Contents
10-11 • Notes • • Product care and maintenance • Customer service Page 12 This instruction manual applies to the following model numbers: # 13208 Mother’s Choice Combo Changetable (walnut) # 13209 Mother’s Choice Changetable (white) MC Combo Changetable 05-13... -
Page 3: Warnings
Instruction Manual & User Guide “IMPORTANT. READ CAREFULLY BEFORE USE AND RETAIN FOR FUTURE REFERENCE.” These instructions detail the safe use, assembly and maintenance of your product. Please read these instructions carefully and ensure that they are followed at all times. •... -
Page 4: Component List
Instruction Manual & User Guide Components List: TIMBER COMPONENTS REQUIRED FOR CHANGETABLE 4 Castors 1 Headboard 2 Side Rails(Top) 1 Footboard 4 Side Rails(Shelf) 3 Shelf Inserts 1 Safety Belt TOOLS REQUIRED: Flat blade screwdriver Allen key (supplied) for lining up barrel but slots (not supplied) HARDWARE: Allen head Bolt and Barrel Nut x 12 Safety belt x 1 Fastening screws x 2 (pre assembled to top side rail) Side Rails (Top) Castors x 4 Changetable Changetable Headboard Footboard Side Rails (Shelf) Change Table Shelf Inserts x 3 MC Combo Changetable 05-13... -
Page 5: Step 1. To Attach Side Rails
Instruction Manual & User Guide Assembling: Combo Changetable STEP 1- TO ATTACH SIDE RAILS Tools/Hardware required: It is recommended that two people are needed to safely assemble this product. Lay one side rail(top) and two side rails(shelf) on a carpeted floor with grooves •... -
Page 6: Step 2. To Attach Shelf Inserts
Instruction Manual & User Guide Assembling: Combo Changetable STEP 2 - TO ATTACH SHELF INSERTS Tools/Hardware required: If it is difficult to fit the shelf inserts between the changer ends, loosen the fixing bolts slighty. Place one shelf insert A into the grooves in the side rails B and back panel C located • at the top of the head board, and repeat the same action with other two shelf inserts, as per Figure 3. -
Page 7: Step 3. To Fit The Remaining Side Rails
Instruction Manual & User Guide Assembling: Combo Changetable STEP 3 - TO FIT THE REMAINING SIDE RAILS Tools/Hardware required: Lay one side rail(top) and two side rails(shelf) on a carpeted floor • with grooves facing down, as per Figure 4A. Align the side rails with the headboard noting the side rail(top) goes to the top, •... -
Page 8: Step 4. To Fit The Foot Board
Instruction Manual & User Guide Assembling: Combo Changetable STEP 4 - TO FIT THE FOOTBOARD Tools/Hardware required: • Lay the assembly so that the headboard is lying face down, and the shelf inserts and Side rails are pointing upwards. • Place the footboard on top of the assembly so that the grooves are facing the shelf inserts. • Arrange the components so that the footboard fits onto the side rail dowels and the shelf inserts fit into the grooves. • Slide the barrel nuts into their holes so that their grooves are facing out and aligned with the S side rail. See Step1 for further instructions. • Slide the allen head bolts into their holes, and screw in. • Stand the assembly upright. • Ensure that the shelf inserts are located in their corresponding grooves, as per Figure • Tighten all bolts before using. Figure 5 MC Combo Changetable 05-13... -
Page 9: Step 5. To Fit The Swivel Wheels
Instruction Manual & User Guide Assembling: Combo Changetable STEP 5 - TO FIT THE SWIVEL WHEELS • Insert the castor spindle into the hole in each leg’s end, as per Figure 6 and push in all the way. • Check that the castors are properly inserted by attempting to gently remove them. STEP 6 - TO CHECK THAT THE CHANGETABLE IS SAFE TO USE Figure 6 • Stand the unit upright. • Tighten all screws with the Allen Key. Do not over tighten the screws. •... -
Page 10: Notes
Instruction Manual & User Guide Notes: MC Combo Changetable 05-13... -
Page 11: Notes
Instruction Manual & User Guide Notes: MC Combo Changetable 05-13... -
Page 12: Product Care And Maintenance
Product care and maintenance Instruction Manual & User Guide • Always store the unit in a clean and dry place. • Do not use abrasives or detergents on the unit’s surfaces. • Scuff marks can be removed with mild soap and warm water. Dry with a soft towel. • Occasional application of furniture polish will maintain the finish of your unit. • Regularly check all bolts to ensure they are tight. • Damaged components should be replaced as required. Customer service • Replacement parts are available from the IGC Dorel Customer Service Department. Please contact our Customer Service Department if you experience a problem with this product or require assistance: AUSTRALIAN NEW ZEALAND CUSTOMERS CUSTOMERS sales@igcdorel.com.au customerservice@igc.co.nz Email www.igcdorel.com.au www.igcdorel.com.au (03) 8311 5300 (09) 274 1040 Phone 1 655-685 Somerville Road 14 Sir William Avenue, East Tamaki,...
Need help?
Do you have a question about the 13208 and is the answer not in the manual?
Questions and answers