ECO Spot LED C25 User Manual

ECO Spot™ LED C25 User Manual
Thank you for choosing an ECO Spot™ Gobo projector. This manual
covers the ECO Spot C25.
Please read this manual before installing or operating this fixture,
follow the safety precautions listed below and observe all warnings.

Package Contents


Projector with power cord

Test Gobo

Spare gobo retaining ring and drive belt

Allen key for yoke adjustment

Safety Information

•
Place your fixture at a suitable place with good air flow.
•
Keep flammable materials away from the fixture.
•
Minimum distance to flammable material = 1 ft (0.3m).
•
Provide a minimum clearance of 4 in (10cm) around air vents.
•
Use only genuine spare parts for part replacement.
•
Do not look directly into the lamp; it can result in eye damage.
•
Always unplug the unit from the power mains before any service is done.
•
Light fixtures should be installed and maintained only by qualified personnel with
experience in lighting equipment and general electrical experience.

Electrical Safety

•
Disconnect the fixture from AC power before handling the fixture.
•
Always ground (earth) the fixture electrically.
•
Use only a power source that complies with local building and electrical codes and
has both, overload and ground-fault protection.
•
Do not use the fixture if the power cable or power plug is in any way damaged,
defective or wet, or if they show signs of overheating.

Warranty

One Year from Date of Purchase. Keep your receipt for reference and
contact your dealer in case of warranty issues.
Copyright © 2017 Globus New Media LLC
ECO Spot LED C25 User Manual
Page 1