Table of Contents
Advertisement
6 Adjust settings
1
Press OPTIONS.
2
Select a setup page.
3
Select an option and then press .
4
Select a setting and then press OK.
•
To return to the previous menu, press
.
•
To exit the menu, press
General setup
On [General Setup Page], you can set the
following options:
[EasyLink]
If this unit is connected to HDMI CEC
compliant TV/devices, all connected devices
can respond to the following commands
simultaneously:
26
EN
OPTIONS.
Option
Description
[One
When you press PLAY , the TV
Touch
and this unit are turned on. Disc
Play]
play starts if there is a disc in the
unit.
[System
When you press and hold
Standby]
STANDBY, connected HDMI CEC
devices simultaneously switch to
standby.
To disable this feature, select
[Decline].
[System
When you play audio that is
Audio
routed from the connected
Control]
devices, this unit switches to
the corresponding audio source
automatically.
To enable this feature, select [On].
Then proceed to [Audio Input
Mapping] to scan and map all the
connected devices.
[Audio
When you map the audio input
Input
correctly, this unit switches to
Mapping]
the audio from the played device
automatically.
Note
•
You must turn on the HDMI CEC operations on the
TV/devices before you can enjoy the EasyLink controls.
See the TV/devices manual for details.
Philips does not guarantee 100%
interoperability with all HDMI CEC compliant
devices.
[Disc Lock]
Set play restriction for specifi c discs. Before you
start, place the disc in the disc compartment
(maximum 40 discs can be locked).
•
[Lock] – Restrict access to the
current disc. You need to enter a
password to unlock and play the disc.
•
[Unlock] – Play all discs.
Advertisement
Table of Contents
