8.3.1
Switch lock
The ON/OFF switch trigger (7) can be locked if the reverse switch (3) is in the
center position. (Fig. 5)
This helps to reduce the possibility of accidental starting when not in use.
8.3.2
Direction of rotation (Fig. 5)
To select forward rotation, release the on/off switch trigger (7) and push the
reverse switch (3) to left side of the tool.
To select reverse rotation, push the reverse switch (3) to right side of the tool.
When the reverse switch (3) is in center position, the ON/OFF switch trigger
(7) is locked.
8.3.3
Variable speed
This tool has a variable speed ON/OFF switch trigger (7) that delivers higher
speed and torque with increased trigger pressure.
Speed is controlled by the amount of pressure on the ON/OFF switch trigger (7).
9 CLEANING AND MAINTENANCE
Attention ! - Before performing any work on the equipment, pull
the power plug.
9.1
Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the
engine.
Regularly clean the machine housing with a soft cloth, preferably after each
use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc.
These solvents may damage the plastic parts.
10
TECHNICAL DETAILS
MODEL NR.
Rated voltage (direct current)
Rotation speed
Impact rate
Charging time
Battery type
Charger rated voltage
Charger frequency
Socket type
Max. torque
Copyright © 2015
F181-60
F181-60
18V
0-2300 min-1
0-3000 min-1
+/-1 hour
1500mAh Li-Ion
230V
50Hz
¼"
80Nm
P a g e
| 9
EN
www.Ford-tools.com