Install System Memory - Biostar AM1MD Quick Start Manual

Motherboard Manual

2.4 Install System Memory

A. DDR3 Modules
Step 1: Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM
on the slot such that the notch on the DIMM matches the break on the slot.
Step 2: Insert the DIMM vertically and firmly into the slot until the retaining clips
snap back in place and the DIMM is properly seated.
Note1: If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.
B. Memory Capacity
DIMM Socket Location
DDR3_A1
DDR3_A2
8
DDR3 Module
512MB/1GB/2GB/4GB/8GB
512MB/1GB/2GB/4GB/8GB
Total Memory Size
Max is 16GB.