Step 2 -Record; Step 3-Connection With Your Pc; Troubleshooting - Pyle PVRC43 Instruction Manual

Step 2 -Record: Press the "REC" key to start recording. Press it again to save the recorded video
and continue to record the next video.

Step 3-connection with your PC

Start your PC; connect the product with the PC by the provided USB cable for charge or data
transfer. When the PC shows USB code, you can copy or delete the video on the product.
Notes:
When recording video, the product cannot be connected to the computer. Otherwise,
the computer will be converted to USB mode and it will not provide power to the product. When
recording, please only use the power adapter to provide the power to the product.
Step 4- Insert or remove SD card
Insert: Insert the card, the card will fit snugly inside SD card slot; do not allow to pop up.
Remove: Lightly push the SD card, the SD will be protrude a little, then you can safely
remove the SD card.

Troubleshooting

1. Before pressing the REC button of the product, please make sure the input sources(DV, DVD
player, VHS) is turned on and can provide audio or video signal to the product.
2. Make sure that the A/V cables are securely connected to both the input sources and the product.
3. If the product is crashed, Please unplug the power and restart.
4. Please use SD cards with transfer speeds rated Class 10 or above.
4