Head Restraint Adjustment; Seat Belts; Passenger Sensing System - GMC Terrain 2018 Owner's Manual

14 In Brief
{
Press or , if equipped, to
ventilate the driver or passenger
seat. A ventilated seat has a fan
that pulls or pushes air through the
seat. The air is not cooled.
Press the heated or ventilated
button once for the highest setting.
With each press of the button, the
heated or ventilated seat will
change to the next lower setting,
and then to the off setting. The
lights indicate three for the highest
setting and one for the lowest.
See Heated and Ventilated Front
Seats 0 62.
Head Restraint
Adjustment
Do not drive until the head restraints
for all occupants are installed and
adjusted properly.
To achieve a comfortable seating
position, change the seatback
recline angle as little as necessary
while keeping the seat and the head
restraint height in the proper
position.
See Head Restraints 0 55 and Seat
Adjustment 0 57.

Seat Belts

Refer to the following sections for
important information on how to use
seat belts properly:
Seat Belts 0 67.
How to Wear Seat Belts Properly
0 68.
Lap-Shoulder Belt 0 69.
Lower Anchors and Tethers for
Children (LATCH System) 0 93.
Passenger Sensing
System
The passenger sensing system
turns off the front outboard
passenger frontal airbag under
certain conditions. No other airbag
is affected by the passenger
sensing system. See Passenger
Sensing System 0 80.
The passenger airbag status
indicator will light on the overhead
console when the vehicle is started.
See Passenger Airbag Status
Indicator 0 124.