Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ag Leader GPS 6500
Summary of Contents for Ag Leader GPS 6500
- Page 1 GPS 6500 User Guide PN 2006239—ENG Rev. B...
- Page 2 © 2016 Ag Leader Technology 2202 South Riverside Drive Ames, Iowa 50010 USA...
-
Page 3: Table Of Contents
GPS 6500 User Guide ........................1 Warranty ............................................1 Proprietary Notice ........................................1 Notice ............................... 1 FCC Notices ............................................. 1 Industry Canada ..........................................2 CE ................................................2 WEEE ..............................................2 REACH ..............................................2 TERRASTAR SERVICE ACCESS ....................................2 Customer Support ..........................3 Contact Information ........................................ -
Page 5: Gps 6500 User Guide
GPS 6500 has been tested and found to comply with the emission limits for a Class B digital device, pursuant to part 15 of the FCC Rules. The Class B limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 6: Industry Canada
WEEE If you purchased your GPS 6500 in Europe, please return it to your dealer or supplier at the end of its life. The objectives of the European Community's environment policy are, in particular, to preserve, protect and improve the quality of the environment, protect human health and utilize natural resources prudently and rationally. -
Page 7: Customer Support
Viewing this Manual Online This operators manual can be viewed online at Ag Leader’s Web site. To view and/or print the Operators Manual online, you will need the Adobe Acrobat or Adobe Reader. The Adobe Reader software comes pre-installed on most personal computers. -
Page 8: Introduction
Power Supply Requirements The GPS 6500 requires +8 to +36 VDC input power. ± WARNING!: The GPS 6500 power source must be protected by a 5 A Fast Blow Fuse or damage to wiring may result (not covered by warranty). -
Page 9: Mounting The Gps 6500
This section contains information on the additional features of the GPS 6500, which may affect the overall design of the receiver system. Status Indicators LED indicators on the GPS 6500 provide the status of the receiver. The table below shows the meaning of the LEDs. Icon LED Color... -
Page 10: Operation
The rover station is the GNSS receiver which does not know its exact position and can be sent correction messages from a base station to calculate differential GNSS positions. The GPS 6500 can be used as a base receiver to transmit RTK or DGPS corrections or a rover to receive the same corrections. -
Page 11: Using The Winload Utility
GPS 6500 Using the WinLoad Utility If opening WinLoad for the first time, ensure the file and communications settings are correct. Open a File to Download Select File. Open. Navigate to the file to open. WinLoad’s Open Window When a file is selected, the filename appears in the main WinLoad... -
Page 12: Upgrading Using The Auth Command
The AUTH command authorizes the enabling (unlocking) of model features. The AUTH command is used to upgrade a new receiver model, available with the same firmware version as the current model. This command only functions with a valid auth-code assigned by Ag Leader. The upgrade can be performed directly through the Ag Leader display. Upgrade Procedure Example: 7WBMBK,887CB6,K5J3FH,5DF5P2,42PW8G,D1SB0GTT0,121211 When the AUTH command is executed, the receiver reboots. - Page 13 GPS 6500 c. GPS only. d. TERRASTAR-D subscriptions are available from Ag Leader f. L2 P for GLONASS. g. L2 C/A for GLONASS. h. Model specific. i. Typical value. No almanac or ephemerides and no approximate position or time. j. Typical value. Almanac and recent ephemerides saved and approximate time entered. For more information.
-
Page 14: Gps 6500 Specifications
14-PIN INPUT/OUTPUT CONNECTOR Power +8 to +36 V DC For the cable pin-outs and drawings, see “GPS 6500 Setup” on page 7. Serial Com Ports RS-232 F Compliant (Rx and Tx signals only) SAE J1939/ ISO 11783/ ISO 11898 Compatible PPS Output 3.3 V CMOS Logic Compatible... -
Page 15: Gps 6500 Dimensions
48.79 Replacement Parts The following are a list of the replacement parts available for the Ag Leader GPS 6500 receiver. Should assistance be required or need to order additional components, please contact your local Ag Leader dealer or Customer Service representative.
Need help?
Do you have a question about the GPS 6500 and is the answer not in the manual?
Questions and answers