Installing The Handles - Bosch B21CL80SNS Operating And Installation Instructions

Installing the handles

Difference between the freezer and the
refrigerator door handle
Handles are located inside of the carton box.
31˝ (787.4 mm)
Refrigerator door handle
2.8˝
(71.1 mm)
31.6˝ (802.6 mm)
Freezer door handle
2.1˝
(53.3 mm)
Refrigerator door handle
1. Take the refrigerator door handle out of the box
and place it as per the direction shown in the figure
(Note: i.e. the direction which both screw holes on
the handle are close to the edge) and hang the
handle above the set bolt.
2. Use the small hexagon wrench supplied in the box
to set the handle screws into both the small
screwed holes on the handle. After they are
screwed down, gently shake the handle to confirm
the handle is tightened.
Inner socket head cap
screw for handle fixing
Refrigerator
door handle
Inner socket head cap
screw for handle fixing
Freezer door handle
The assembly steps of the freezer door handle are the
same as the ones of the refrigerator door handle.
During the assembly of the handle the direction of
tapping hole is downward (towards the ground).
Bolt
Bolt
en-us
9