Dexin KS-28103 User Manual

2.4ghz multimedia keyboard mouse set

Advertisement

Quick Links

2.4GHz Multimedia Keyboard Mouse Set
USER'S MANUAL (Model #: KS-28103)
Important Ergonomic Information
Some experts believe that using any mouse or trackball may cause serious
injury to hands, wrists, arms, neck, or back. If you feel pain, numbness, or
weakness in these areas, see a qualified health professional.
TO REDUCE THE RISK OF INJURY, FOLLOW THESE PRECAUTIONS:
Take frequent breaks, get up and walk around several times every hour.
Vary your tasks throughout the day.
Keep your shoulders relaxed with your elbows at your side. Position your
keyboard and mouse so you do not have to reach.
Adjust your chair and keyboard so your upper arms and wrists are straight
Avoid resting your wrists on sharp edges
SYSTEM REQUIREMENT
The mouse is compatible with standard Microsoft mode.
rd
3
button and wheel function require Win98/ ME/ 2000/ XP/ Vista
th
th
4
& 5
buttons require Windows 2000 or XP, Vista, or driver installation
If your operating system (OS) is Windows98/98SE, please prepare the Windows98
or 98SE compact disk for system's request during the installation of mouse.
Keyboard is compatible with standard Microsoft mode.
The Multimedia, Internet hot-keys of the keyboard require XP, Vista, or driver
installation

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KS-28103 and is the answer not in the manual?

Questions and answers

Summary of Contents for Dexin KS-28103

  • Page 1 2.4GHz Multimedia Keyboard Mouse Set USER’S MANUAL (Model #: KS-28103) Important Ergonomic Information Some experts believe that using any mouse or trackball may cause serious injury to hands, wrists, arms, neck, or back. If you feel pain, numbness, or weakness in these areas, see a qualified health professional.
  • Page 2: Getting Started

    Getting Started Congratulations on your purchase the KS-28103 set, wireless optical mouse and multimedia-internet keyboard set. The slim type keyboard is an all new design keyboard with convenient hot keys. The wireless mouse is designed with an optical tracking engine. The product will bring you a special experience in using computer and surfing web.
  • Page 3: Before You Begin

    shield or ground to the RF antenna of the mouse and receiver. Operating on a metal surface may shorten the transmission distance. If your notebook computer has a metal (contains Al or Mg) case, the metal housing of the LCD panel will isolate partial radiation of the RF signal from the mouse. This could possibly result in reducing the distance of transmission when you operate the mouse right in front of the notebook and when the receiver is connected on the back of the notebook.
  • Page 4 4. Clip the battery cover back into place and make sure it is firmly closed. Insert 2 AAA Batteries The wireless mouse uses 2 AAA batteries. They are inserted as follows: 1. Remove the battery compartment cover. 2. Install batteries with the positive (+) & negative (-) in the correct direction indicated by the battery compartment label.
  • Page 5 Pairing the mouse, please follow the steps as below: If the mouse is in sleep mode click the mouse button once to wake it up. Bring the mouse within 1ft range from the receiver. Power on the mouse. Hold the mouse upside-down and use a pointed object, such as a pen tip, to click the CONNECT button (ID button) once.
  • Page 6: Operation Guide

    Test some keyboard’s function to test if it was successful. If the synchronization is not successful for some reason please Remove the batteries and unplug the receiver Wait for 20 sec then to try the step 1 to 2 again Note: * During normal use, please make sure that the mouse &...
  • Page 7 LED on the wheel of the mouse will flash frequency when moving or clicking the mouse. Although the mouse can still work for a while, the user, at this time, should have a new set of batteries ready for replacement as soon as possible. POWER ON/OFF MOUSE DC103 designed for power saving, you can power ON/OFF by sliding ON/OFF switch on the mouse bottom.
  • Page 8 Storing receiver: To store in the mouse bottom, place USB plug end of receiver (A) into place then snap bottom of receiver into position (B). Receiver will now be locked into position. Removing Receiver: Using the tip of your finger, life receiver from USB plug end first and remove from cavity.
  • Page 9: General Specifications

    8. My computer: Press this button to launch the default File-Manager browser. 9. Calculator: Press this button to launch the default calculator application. 10. Previous Track: Press this button to change the previous media track 11. Next Track: Press this button to change the next media track GENERAL SPECIFICATIONS 800dpi hardware resolution wireless optical mouse Wireless Keyboard with Multimedia/Office/Web function keys design.
  • Page 10 caused by low battery or the optical sensor’s data error). A: Please take out one of batteries and put it back for a power reset and then redo the connect procedure. Q: The mouse does not work after waking up from power off mode by pressing the connect button once.
  • Page 11 upon the completion of channel switching. Normally, the effective transmission distance is about 3 feet, depending on the environment. If the effective distance between the mouse and the receiver is bad, try to change the location of the receiver. 4. If you have difficulty connecting the wireless mouse: Increase the distance between the set of wireless mouse and other radio device units.
  • Page 12 Electromagnetic Characteristics (EMC) Tested to comply with FCC standards For home or office use This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 13 IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with FCC RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting. End users must follow the specific operating instructions for satisfying RF exposure compliance.

Table of Contents