Page 2
Product Key Power Button Earphone Connector Front-Facing Camera Speaker Ambient Light Sensor LED Indicator Microphone Menu Home Back USB Connector Left Side Front Bottom Installing the SIM Cards...
Page 3
Compartment Door Rear-Facing Camera Camera Flash Hand Strap Mount Rear Speaker Volume Up Volume Down Back Right Side WARNING: The top and bottom port covers must be clean and securely seated before exposing the unit to water. Failure to perform this step could lead to water damage of the unit.
Page 4
4 With Bluetooth on, this screen shows a list of nearby Bluetooth devices. 5 Tap on the device you want to access. NOTE: While the Bluetooth settings page is open, the CT7G is discoverable, allowing other devices to connect to the CT7G.
Page 5
3 Use a Phillips screwdriver to loosen the three screws that secure the cover over the camera (on the back of the device), and remove the cover. NOTE: The CT7G provides a mini SIM slot (right side of the compartment) and a micro SIM slot2 (center of the compartment).
Page 6
6 Tap the capture icon to take the picture. 7 You can capture video with sound by tapping the video icon. SUPPORT Web: http://www.junipersys.com/Juniper-Systems-Rugged-Handheld-Computers/products/ Cedar-Products/Support Email: CedarSupport@junipersys.com Phone: 435-753-1881 REGULATORY INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Page 7
• International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996. • Ministry of Health (Canada), Safety Code 6. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR.
Need help?
Do you have a question about the CT7G and is the answer not in the manual?
Questions and answers