Getting Started; Compatibility; Docking An Iphone Or Ipad - Technika SP1102PA Owner's Handbook Manual

GETTING STARTED

CONNECTING POWER
Before connecting the power, check that the mains voltage
on the rating plate of the AC adaptor is the same as the
voltage in your area.
• Plug the DC cord from the AC adaptor into the DC jack on
the back of the unit.
• Plug the AC adaptor into the wall socket and switch the
mains power on.
The unit is now ready for use.
NOTE:- The AC adaptor may become warm during operation
- this is normal.

COMPATIBILITY

The dock connector on this unit is only compatible with
iPhone, iPad and iPod touch models. All references to iPhone
in this handbook refer also to iPad and iPod touch.
NOTE: This product is compatible with iPhone, iPad and iPod
touch only. All other iPod models should be connected via
the AUX cable. Attempting to dock other iPod models may
damage the dock and also the iPod.
CHARGING THE iPhone
An iPhone will charge when it is docked and the docking
station is set to Standby or when the Aux source is selected.
DOCKING AN iPhone
To dock your iPhone:
• Unlock the iPhone and select the function you want to
play.
• Locate the iPhone on the Docking Connector and press it
gently home.
The iPhone is now ready to play.
To remove your iPhone from the dock:
• Grip the iPhone at the sides.
• Lift the iPhone gently from the dock.
5
CONNECTING TO THE AUX JACK
A cable is supplied to connect other sources with Line out or
Headphone jacks to the AUX input of your docking station.
These sources could include -
• iPod models other than iPhone or iPod touch.
• Other types of MP3 personal audio players.
• Personal CD players.
To connect a source via the AUX cable:
• Connect one end of the AUX cable (supplied) to the
Headphone jack of the player.
• Connect the other end of the cable to the AUX-in jack
located on the back panel of the Docking Station.
NOTE: The remote control will not operate the playback or
menu functions of an iPod or other player that is connected
via the AUX input.