Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Autrex AHDR308A
- Page 1 DVR USER MANUAL AHD-DVR Version 3.0...
-
Page 2: Table Of Contents
Contents 1.Menu operation..........................1 1.1 Local Operation Guide......................1 2. Start/ Shutdown System......................1 2.1 Local Menu-Start setting....................1 3. Preview............................4 4 System Configuration Setting..................... 5 4.1 Device..........................5 4.2 Channel..........................6 4.2.1 Display Setting......................6 4.2.2 Video Parameters....................7 4.2.3 Schedule Record....................8 4.2.4 Motion Detection.................... - Page 3 11. Alarm setting..........................32 12. File Manage..........................32 13. Image Setting........................... 33 14.Screen Aspect Ratio/Segmentation..................34...
-
Page 4: Menu Operation
1.Menu operation 1.1 Local Operation Guide Click right mouse button in the local preview screen as shown in the below picture 2. Start/ Shutdown System (click Start on the main menu) 2.1 Local Menu-Start setting (Power Off, Reboot, Login and Logout, User guide, Device Time and Volume) - Page 5 1 Power off: Switch on the power source correctly, press the button and start up the device 2 Login Click Login, then enter to DVR login interface, you can input you own user name , the default user is admin, the default password is empty. 3 User guide After login DVR interface, it will automatically enter into User guide interface, the interface includes four steps, respectively as below...
- Page 6 Network setting: IP: Input corresponding number to set the IP address Subnet mask: Input corresponding IP subnet mask Gateway address: Input corresponding gateway address Click Next to save and login DVR interface directly, as shown in the below picture: In addition, the settings can be modified in the start menu by clicking User guide directly to enter.
-
Page 7: Preview
3. Preview The main preview interface will appear as shown in the below picture after starting up and successfully login. (Note: We take 8-ch for example in this paper) -
Page 8: System Configuration Setting
4 System Configuration Setting (click Setting on the main menu) 4.1 Device Click Device, it will appear Device Info. interface, please input and modify the relevant basic information, then click Save, as shown in the below picture: 1 Device Info.: Check and modify the basic information Mode Modify: Click the drop down list of Mode, there are 8 different video output modes optional, respectively for 8x[1920*1080],8×[1920*1080]+IP4×[1920*1080] all used in AHD video output... -
Page 9: Channel
4.2 Channel 4.2.1 Display Setting Select the relevant channel and modify the parameters on the Display Setting interface, as shown in the below picture: 1 Channel Modify the specified channel name for the input devices 2 Local Camera Name Modify channel name for specified channel 3 Time Format Select time display mode for the access devices... -
Page 10: Video Parameters
4 Date Format Select date display mode for the access devices 5 OSD Position Set corresponding display position for the access devices name and display-time 6 Image Setting Adjust brightness/ contrast/ saturation/ hue for the access devices Note Except 1, other settings are only valid for the private protocol connected devices) 4.2.2 Video Parameters Modify the relevant channel video parameters on the Video Parameters... -
Page 11: Schedule Record
4.2.3 Schedule Record Modify each video channel parameters on the Schedule Record interface,as shown in the below picture: 4.2.3.1 Video Precise Backup Double-click to set precise video backup, the check box in front of All Day Recording can not mark, and then double-click the small check, the following interface will pop-up, as shown in the below picture: 4.2.3.2 Record time Click Record Time, to set period time recording on the Schedule Record... -
Page 12: Motion Detection
Note It can set 8 periods video recording mode during one day 4.2.3.3 Advanced Record Set relevant advanced recording parameters for each channel on the Advanced interface, as shown in the below picture: 4.2.4 Motion Detection (Note: Fore-end IP Camera must support motion detection) Modify each video channel parameters on the Motion interface,as shown in the below picture:... - Page 13 1 Click √ in front of Enable Motion Detection 2 Set motion areas, as shown in the below picture: 3 Adjust sensitivity volume 4 Set arm schedule 5 Select linkage, as shown in the below picture:...
-
Page 14: Video Lost
Upload to Center: Alarm information upload to platform 4.2.5 Video lost Modify each video channel parameters on the Video Lost interface,as shown in the below picture:... -
Page 15: Tampering Alarm
1 Click √ in front of Enable Video Lost 2 Set arm schedule 3 Select linkage, as shown in the below picture: 4.2.6 Tampering Alarm (Note Fore-end IP Camera must support tampering alarm) Modify each video channel parameters on the Tampering Alarm interface,as shown in the below picture:... - Page 16 1 Click √ in front of Enable Video Tampering 2 Set tempering alarm areas, as shown in the below picture: 3 Set alarm schedule 4 Select linkage, as shown in the below picture:...
-
Page 17: Video Mask Setting
4.2.7 Video Mask Setting Modify each video channel parameters on the Video Mask interface,as shown in the below picture: 1 Click √ in front of Enable Video Mask 2 Set mask areas, as shown in the below picture:... -
Page 18: Network
4.3 Network Set the relevant parameters on the Network interface, as shown in the below picture. 4.3.1 Network Setting Modify the basic network parameters on the Network Setting interface, as shown in the below picture:... - Page 19 1 NIC: Select DVR NIC, only one NIC for default(Without setting) 2 IP address Input the relevant IP address number (IP 192.168.1.188 default DHCP:Click √ in front of DHCP, it will automatically acquire a valid IP according to the router DHCP. If not, the last used IP is selected as the default. 4 Subnet Mask: Input relevant IP subnet mask number 5 Default Gateway: Input relevant default gateway 6 First DNS: Set DNS server IP address...
-
Page 20: Dnns Setting
4.3.1.1 Advanced setting Set advanced configuration parameters on the Advance interface, as shown in the below picture: 1) Manage host to make DVR register the servers automatically 2) Enable PPPOE function to achieve DVR dialing Click √ in front of Enable UPnP, after set HTTP port and TCP port, it can match successfully, notice the port number can not conflict with other devices. -
Page 21: Ntp Setting
1) Select DDNS server type There are Dyndns, PeanutHull, NO-IP, 3322, and Dnsdynamic five types for selection 2) Input the server name,For example member.3322.org 3) Input the port, 80 for default 4) Input the user name 5) Input the password 6) Confirm the password 7) Input the standby domain name 4.3.3 NTP Setting... -
Page 22: Management Platform
For example: Outbox address: zhangsan@163.com Password: Outbox email password Receiver address: Test@yahoo.com SMTP server: smtp.163.com SMTP port 25 4.3.5 Management Platform User can open or close device protocol optional on the Management Platform interface, as shown in the below picture:... -
Page 23: Alarm
4.4 Alarm Set the relevant parameters according to the need on the Alarm interface, as shown in the below picture: 4.4.1 Alarm Input Set alarm input parameters on the Alarm Input interface, as shown in the below picture: 1 Enable alarm handle 2 Set alarm schedule 3 Select linkage, as shown in the below picture:... -
Page 24: Alarm Output
4.4.2 Alarm output Set alarm output parameters on the Alarm Output interface, as shown in the below picture: 1 Set alarm output delay 2 Set alarm schedule... -
Page 25: Exception
4.4.3 Exception Set abnormality on the Exception interface, as shown in the below picture: 4.5 Account Set account setting and user online on the Account interface, as shown in the below picture:... -
Page 26: Account Information Setting
4.5.1 Account information Setting Add / Modify/ Delete the user or distribute user permission on the Account Setting interface, as shown in the below picture: Click User Privilege,as shown on the below picture: 4.5.2 User Online Checking Check the current user connection status on the User Online interface, as... -
Page 27: System Administration
shown on the below picture: 4.6 System administration Set the relevant parameters on the System interface, as shown in the below picture. -
Page 28: Device Log
4.6.1 Device Log Click Device Log on the System interface, check device log for different video type and diverse date time optional, as shown in the below picture: 1 Main Type of Log: All Type/ Alarm/ Exception/ Operation for selection 2 Sub Type: According to the different main types, there have corresponding sub type for selection 3 From: Select a start time for log query... -
Page 29: Hdd Setting
4.6.3 HDD Setting Click HDD Setting, check HDD capacity / free space, and do format by clicking √ in front of HDD No., then click Format, as shown in the below picture:... -
Page 30: System Update
4.6.4 System Update Browsing the upgrade file on the Update interface, click Upgrade to update Device. 4.6.5 Auto Reboot There are Disable/ Every Day/ Every week/ Once options for selection, the device will restart according to the maintenance mode. 4.6.6 Recovery Configuration Click Export Configuration/Import Configuration/Default to make device do corresponding operation. - Page 31 1 Speed control: Set PTZ vertical/ horizontal rotation speed, lens zoom, aperture, and focus speed to control front-end camera 2 Accessory equipment: To control the access equipment 3 Preset setting: Rotate the camera to appropriate angle and position by PTZ directional button, select a preset number in the drop-down list, and click button.
-
Page 32: Manual Record
6. Manual Record (click Record on the main menu) Manual record has highest priority, whatever status of each channel, click Manual ,then all of the corresponding channels will do ordinary record,as shown in the below picture: 7. Manual Snapshot (click Capture on the main menu) Select Capture on the main menu, click in the lower right corner of the screen to do snapshot on the preview channel, and check the image... - Page 33 1 Pause: Click to pause the current playback 2 Stop: Click to stop the current playback 3 Slow Click to slow down the playback speed (1/2 1/4 1/8 1/16 times optional 4 Fast Click to speed up the playback process(2 4 8 16 times optional 5 Snapshot: Click to snapshot any playback channel video image...
-
Page 34: Screen Display Setting
9. Screen Display Setting (click Display Setting on the main menu) Select Display Setting in the main menu, the following interface will pop-up 1 Language: Different kinds of languages for selection (Simplified Chinese, English, French, etc.) 2 Auto Logout: It will logout automatically without operation during setting minutes 3 TV Adjust: Adjust the display position of analog output preview video 4 Display: Adjust the brightness/ contrast/ saturation/ hue/ transparency... -
Page 35: Alarm Setting
Channel Select relevant channel in the drop-down list in need From Select a start time for video backup To Select a end time for video backup Once click Start, it will backup video file automatically, and show the backup process meanwhile, you also can click Stop and Unmount USB 11. -
Page 36: Image Setting
Select File Manager in the main menu, the file list column will show an external storage device backup files and local snapshot image, as shown in the below picture: 13. Image Setting (click Image Setting on the main menu) Adjust the video image brightness/ contrast/ saturation/ hue on the Image Setting interface, as shown in the below picture:... -
Page 37: Screen Aspect Ratio/Segmentation
14.Screen Aspect Ratio/Segmentation According to the DVR version on the main menu, as shown in the below picture:...
Need help?
Do you have a question about the AHDR308A and is the answer not in the manual?
Questions and answers