Touch-Control Power Button And Indicator - JMGO Smart Theater Manual For Quick Start And Warranty Card

Touch-control Power Button and Indicator

The power button of this product is touch-control based and the switch on/off functions
can be realized by touching the power button. The indicator nearby the power button
shows different working status of the equipment through the changing of colors.
1. In case of standby mode after power is given, the red indicator will light.
2. In the mode of standby, the equipment can be switched on and enter into projection
mode after touching the power button or giving a short press on the Power button of
remote control.
Electrical Lens Slide
Touch the power button on the top of the machine or give a short press on the power
button of remote control to switch on/off projection with the electric lens slide
automatically opening/closing; When the machine is switched off, the lens slide can
provide a full protection to the lens.
Forcible operation of the lens slide by hand or outside force is prohibited; otherwise it may
damage the structure of the equipment.