Advertisement
Installing iPhone 4S Battery
Step 4 — Battery
Step 5
Use a plastic opening tool to pull the pressure contact from underneath the battery
connector.
When reinstalling the pressure contact, be sure to clean it with a degreaser such as
windex or isopropyl alcohol. The oils on your fingers have the potential to create
wireless interference.
© iFixit — CC BY-NC-SA
www.iFixit.com
Remove the following screws
securing the battery connector to
the logic board:
One 1.7 mm Phillips screw
One 1.5 mm Phillips screw
Page 4 of 6
Advertisement
