Advertisement
PROBLEM
Mower won't start
Excessive vibration
Poor grass collection
TROUBLE SHOOTING GUIDE
PROBABLE CAUSE
Not connected to power
supply
Damaged supply cable
Damaged mower cord
Thermal overload cut-
out switch activated
Blades incorrectly
assembled
Blades damaged
Blades clogged with
dirt
Blades dull or damaged
Mower clogged with
dirt
Grass catcher clogged
with dirt
CORRECTIVE ACTION
Connect to power supply and switch
on. Check that circuit breaker is
switched on
Unplug and remove extension cable,
inspect and replace if damaged.
Unplug and ckeck mower cord for
damage, check connection to switch.
If damaged have repaired by an
authorised Lawn Star service agent
Disconnect from power supply and
allow motor to cool for approx 20
minutes
Disconnect from power supply and
check assembly and fitment. Make
sure blades are positioned facing
outwards from the disc
Disconnect from power supply and
replace with new blades
Disconnect from power supply,
remove, clean and replace
Disconnect from power supply and
replace with new blades
Disconnect from power supply, clean
underside of chassis, fan and grass
collection chute
Disconnect from power supply, clean
grass collection box or replace if
necessary
Advertisement
