Design and Development DECLARATION OF CONFORMITY Specifications Model DriStorm 134 DriStorm 184 We, declare under sole responsibility that our model dehumidifiers to which this Water Removal(86°F / 80% RH) 134Pint / 63L per day 184Pint / 87L per day declaration relates are in conformity with the following standards : Water Removal(68°F / 60% RH)
Do not attempt to disassemble or repair the unit if you are not qualified to Fax: 210 – 654 – 3904 do so. info@steambrite.com Warranty How to Use Dehumidifiers Shazaam warrants to the original purchaser that if, within a period of 12...
Setting Up a Drying Area Managing the electrical consumption CAUTION! Never operate the DriStorm dehumidifier at temperatures above The dehumidifier should be plugged in to grounded electrical outlet. In large F. It could damage the machine and building contents. disaster environments, you will find the use of optional 230v to 115 volt converters helpful.
Page 5
display “TIMER” CLOCK time, which reads “00:00”. Press it again Before Each Use to display the “TOTAL” CLOCK time. Inspect the electrical cord for damage. If the DISPLAY key has not been pressed within 15 seconds, the Inspect pump tube.
Page 6
See “How to Use the Touch Pad Control Panel” for more details. “TOTAL” CLOCK. While displaying the “TOTAL” CLOCK time, “TOTAL” CLOCK icon is on. The digits show how many DAYS the machine has been used. “JOB” CLOCK. While displaying the “JOB” CLOCK time, “JOB”...
Page 7
“DEHUMIDIFIER ON” icon. The dehumidification runs continuously if there is no “TIMER” has been set before it starts. Otherwise, the dehumidification stops as the “TIMER” set. Press the START/STOP key again to stop the dehumidification. The “DEHUMIDIFICATION ON” icon comes off while the dehumidification stops.
Need help?
Do you have a question about the DriStorm 184 and is the answer not in the manual?
Questions and answers