Advertisement
Quick Links
Advertisement
Related Manuals for Adam S2V
Summary of Contents for Adam S2V
- Page 1 SERIES QUICK START GUIDE...
-
Page 2: Important Safety Instructions
1. IMPORTANT SAFETY INSTRUCTIONS Please read the following safety instructions before setting up your system. Keep the instructions for further reference. Please heed the warnings and follow the instructions. Caution Risk of electrical shock Do not open Risque de shock electrique Ne pas ouvrier CAUTION: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE BACK COVER OR ANY OTHER PART. - Page 3 1. IMPORTANT SAFETY INSTRUCTIONS Unplug this apparatus during lightning storms or when unused for long periods of time. Always keep electrical equipment out of the reach of children. Do not expose this product to rain or moisture, never wet the inside with any liquid and never pour or spill liquids directly onto this unit.
- Page 4 2. MANUAL This is the S Series Quick Start Guide, which is designed purely to get you up and running with your new ADAM Audio monitors as quickly as possible. For the full users' manual, visit: www.adam-audio.com/s-series/manual...
- Page 5 3. CONNECTIONS Despite all the power and flexibility the S Series monitors have to offer, setting them up is very straightforward. The only choice you have to make is whether to drive them digitally or with a traditional analog signal. This selection is made via the rear-panel OLED display and its adjacent dual-function push-button/rotary encoder, which allow access to the S Series DSP settings.
-
Page 6: Getting Started
4. GETTING STARTED Before using your new speakers, you should let them settle at the ambient temperature of your listening environment by leaving them in position for an hour or so after unpacking them. We recommend that the S Series speakers are driven on a solid, stable surface for best results. Please also be aware that before optimum performance can be attained, it always takes some hours of continuous usage to 'break in' factory-fresh reference monitors. - Page 7 → Place each of your monitors at least 400 mm [16 inches] from the nearest wall to minimize back reflections, which can adversely affect your chances of accurately monitoring low-frequency information. If at all possible, avoid placing loudspeakers near room corners for the same reason: with two reflective surfaces in close proximity, the chances of unwanted reflections affecting your low-frequency audio are even greater.
- Page 8 To learn more about tailoring your speakers to your individual room's acoustics with the onboard DSP, please go to www.adam-audio.com/s-series/manual, where you will find a full explanation of how to use the DSP module.