Ethernet Port - Vecow ECS-9210 User Manual

Fanless embedded system ecs-9200 series; ecs-9100 series
Table of Contents

Advertisement

Multi-Stream Transport Display Resolutions Table:
Multi-Stream Transport Display
One panel Display
Two panel Displays concurrently
Three panel Displays concurrently
2.2.8 USB 3.0
SIM 2
1
WLAN
RST
There are 4 USB 3.0 connections available supporting up to 5GB per second
data rate in the front side of ECS-9200/9100. It is also compliant with the
requirements of Super Speed (SS), High Speed (HS), Full Speed (FS) and Low
Speed (LS).

2.2.9 Ethernet Port

SIM 2
1
WLAN
RST
There are dual 8-pin RJ-45 jacks supporting 10/100/1000 Mbps Ethernet
connections in the front side. LAN 1 is powered by Intel i219 Ethernet Phy and
LAN 2 is powered by Intel I210 Ethernet engine. When both LAN 1 and LAN 2
work at normal status, iAMT 11.0 function is enabled.
Using suitable RJ-45 cable, you can connect the system to a computer or to
any other devices with Ethernet connection; for example, a hub or a switch.
Moreover, both LAN 1 and LAN 2 support Wake on LAN and Pre-boot functions.
The pin-outs of LAN 1 and LAN 2 are listed as follows:
SIM 3
2
3
SIM 1
CFast
SIM 3
2
3
SIM 1
CFast
Max. Resolution
4096x2304@60Hz
2880x1800@60Hz
2304x1440@60Hz
DVI-D
DP
DVI-I
DVI-D
DP
DVI-I
GETTING TO KNOW YOUR ECS-9200/9100
LAN 1
LAN 2
LAN 1
LAN 2
25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ecs-9210mEcs-9201Ecs-9201mEcs-9101Ecs-9110

Table of Contents