PEUGEOT ENERGYStand-2000R Using Manual page 19

Installing retractable arm (M)
Place on a well established stable surface.
1
3
Set the saw on the brackets so
5 6
the screws match the holes in
the base of your machine, then tighten.
The machine is now in solidarity with
the arm and can be moved or removed
very easily.
7 8
Installation Procedure and folding
1. Submit saw the support.
2. Retract extensions to reduce the size of the bridge.
3. Press the lever A1 of each leg to fold under Part
the upper bridge until the button snaps into pressure
closed position.
Before any transport operation, ensure that all parts and
moving parts of the set are secured in the clamped position.
100518-2-Manual-C.indd 19
5
2
4
en
6
10/12/15 10:54:17