Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for ShenZhen Keymantek K36
- Page 1 K36 Hand-held Terminal MANUAL ShenZhen Keymantek Co.,Ltd. 2012...
- Page 2 Warning ：Please read the followings before operating the terminal. Do not take the battery out when it is charging. Disassembling the terminal and/or any damage to the surface should void the warranty. Keep the display screen free from any kind of stress. Keymantek is not responsible for that damages.
-
Page 3: Table Of Contents
Basic informations ..........4 Chapter 1 1.1Performance ................4 1.2 Buttons ..................5 1.3 Accessories ................7 Chapter 2 Getting Start ..............8 2.1 Installing & Changing Battery ...........8 2.2 Power on & Power off ..............8 2.3 Charging the Battery .............. 11 2.4 Sleep & Wakeup ..............12 2.5 Taskbar ................... - Page 4 K36 Hand-held Function use ..........29 Chapter 4 Keyboard & Input mode ..........33 4.1 Keyboard ................33 4.2 Input panel ................33 Chapter 5 Installing & Removing software ........35 5.1 Directory ................35 5.2 Installing Microsoft ActiveSync ..........36 5.3 How to install software ............
-
Page 5: Chapter 1 Basic Informations
Chapter 1 Basic informations 1.1Performance Item Description Microsoft Windows CE.Net 6.0 s3c2416 400 MHz Processor Memory 256M Flash ROM, 64M DDR2 QVGA 2.8 240 x320 resolution, Transflective, portrait mode Display TFT High-reliability adjustable LED IRDA METER additional SYMBOL engine(1D) function additional RFID (125KHz、134.2KHz、13.56MHz) WIFI、GPRS、GPS、BlueTooth Backup... -
Page 6: Buttons
Communicate on USB /Wifi/CDMA/GPRS/Bluetooth optional Storage Micro SD card（16GB MAX） Dimensions 156mm*71.5mm*26/32mm Weight 285g 1.2 Buttons Action Power key.Press the key to turn the terminal on when off.Press the key to enter suspend/wakeup status.Press the key for 3 seconds to turn the terminal off. Combination function key Combination function key Left Scan button... - Page 7 TAB Direction key-Down Executes a selected item. ENTER KEY TAB as PC Backspace key Numeric-1 Numeric-2/Letter-ABC Numeric-3/Letter-DEF Numeric-4/Letter-GHI Numeric-5/Letter-JKL Numeric-6/Letter-MNO Numeric-7/Letter-PQRS Numeric-8/Letter-TUV...
-
Page 8: Accessories
Numeric-9WXYZ Numeric-0 and Space Switch input method 1.3 Accessories Item Quantity Remark Terminal Stylus USB cable Allows USB connection from the terminal to a host computer,allows charging of the terminal through the cable. Charger For charging the battery and set Lithium-ion 1pcs battery... -
Page 9: Chapter 2 Getting Start
Chapter 2 Getting Start 2.1 Installing & Changing Battery 1. Be sure that the Terminal is turned off; 2. Unlock the Battery Cover; 3. Remove the Battery Cover; 4. Insert battery in the battery compartment with the tie on the battery;... - Page 10 initialization finish，then you can see the WinCE（See Figure 2-2）. Figure 2-1 Figure 2-2 Please calibrate the screen when turning on the terminal for the first time. (1)Click the button on the desktop，Select "Settings"->"Control Panel"。 (2)Select "Stylus"(See Figure2-3)，and double-click。 Figure 2-3 (3)Select“Calibration”，then click the “Recalibrate”button(See Figure2-4)。...
- Page 11 Figure 2-4 (4)Press and hold the tip of stylus on the center of each target appears on the screen。...
-
Page 12: Charging The Battery
Figure 2-5 You can recalibrate the screen at anytime. Power off Please close all programs before turning the terminal off. Press button for more than 3 seconds,the display will be closed, Power LED is off, terminal closed. (See Figure2-6) Figure 2-6 2.3 Charging the Battery Insert the battery into the terminal compartment and charge the battery with USB charger. -
Page 13: Sleep & Wakeup
Figure 2-7-1 Figure 2-7-2 2.4 Sleep & Wakeup (1). Sleep Just press (more than 3 seconds)to set the terminal in sleep stae when the terminal is power on.Keyboard and/or touchpad does not respond unless the terminal wakes up. The terminal will sleep if there is no operation for a long time when the terminal is on.See 3.2 for setting the time. -
Page 14: Taskbar
2.5 Taskbar The Taskbar at the bottom of the window displays the active programs，See Figure2-8： Figure 2-8 Start Icon is used to quickly start a program,find a file,access the settings window or access help.（See Figure 2-9） 。 Figure 2-9 Icon，is used to toggle betwen different input modes(with input panel) （See Figure 2-10-1、2）... -
Page 15: Desktop
Icon，to indicate current task,toggle between different tasks. （See Figure 2-11） Figure 2-11 Icon,is used to indicate the current time.You can also change it by double-clicking the icon.Select ->"Settings"->"Taskbar and Start Menu"-“Show Clock” to show/hide the clock. （See Figure 2-12-1、2） Figure 2-12-1 Figure 2-12-2 2.6 Desktop The desktop window appears when power on the termnal... -
Page 16: Resetting The Terminal
Desktop Figure 2-13-1 Figure 2-13-2 Figure 2-13-3 2.7 Resetting the Terminal If the terminal stops responding to input,reset it. Insert the stylus into Reset Port （ See Figure 2-14） ， for more than 1 second to reset the terminal.You can also release battery , install battery and power it on to reset. -
Page 17: Chaper 3 Settings
Reset button Figure 2-14 Chaper 3 Settings To view available options for your terminal settings,tap -"Settings"-"Control Panel". Figure 3-1 Figure 3-2 The following table lists the applications available in the Control Panel. - Page 18 Icon Description View the settings and change the system settings. Calibrate the touch screen.See Chapter 2.5 for more information. View battery status and change power management options. Change owener's password and set security options. Set how numbers,currencies,dates,and times are displayed. Change date,time and time zone information.
-
Page 19: Settings
Change owener's personal profiles. View system information,and change memory settings. Display settins, set desktop background, appearance, backlight,and brightness. Note：Do not change the settings which is not on the above table. 3.1 Settings Select "Control Panel"-" Settings" to change system settings.(See Figure 3-3/Figure 3-4). -
Page 20: Power
Parameter Setting tab:Display terminal configuration data. 3.2 Power Select "Control Panel"-"Power",you can see the status of the main and backup batteries and set power management options. Battery tab:provide general information on battery conditions.The amount of useful operating time remaining varies depending on battery type and how you use the terminal. -
Page 21: Password
Figure 3-7 Figure 3-8 The terminal will sleep automatically when you choose "Switch state to Suspend" （See Figure 3-9） Figure 3-9 3.3 Password Select "Control Panel"-"Password" （ See Figure 3-10） to change the owner's password and set security options.When “Enable password protection at power-on”... -
Page 22: Regional Settings
on the terminal. Figure 3-10 Note：You cannot operate the terminal if you forget your password when "Enable password protection at power-on" is set. Send the terminal back to Keymantek or distributor when this happened. Advice：Do not set the "Enable password protection at power-on" except for special purpose.(Figure 3-10) to save, to cancel. - Page 23 Figure 3-11 Number tab（See Figure 3-12） ：select desired options. Figure 3-12 Currency tab（See Figure 3-13） ：select desired options. Figure 3-13...
-
Page 24: Date/Time
Time tab（See Figure 3-14）:select desired options. Figure 3-14 Date tab（See Figure 3-15） ：select desired options. Figure 3-15 to save, to cancel. 3.5 Date/Time To change the date,time and time zone information,select "Control Panel"-"Date/Time"（See Figure 3-16）. -
Page 25: Owner
Figure 3-16 to save, to cancel. 3.6 Owner Select "Contro Panel"-"Owner" Identification tab（See Figure3-17） ： Fill in or edit the data as desired.To have this information displayed when you start the terminal,select “Display Owner Identification” check box. Figure 3-17... - Page 26 Notes tab （ See Figure3-18 ） ： To add more information,enter information in the Notes box.To include this information on startup,select Display owner notes. Figure 3-18 Network ID （See Figure3-19） ： Enter the user name,password,and domain name.Windows CE uses this information to gain access to network resources.
-
Page 27: System
to save, to cancel. When the Display owner identification/notes check boxes are selected,the Welcome window（See Figure 3-19） appears when the terminal is powered on.Press to See Windows CE. 3.7 System Select "Control Panel"-"System" view general system properties,change memory settings,input device name and view copyright information. - Page 28 Figure 3-21 Device Name tab（See Figure 3-22） ：You can customize the name(without spaces) and description of your device. Figure 3-22 Copyrights tab（See Figure 3-23） ：Display any relevant copyright information.
-
Page 29: Display
Figure 3-23 save, to cancel. 3.8 Display Display Properties window change desktop background,backlight settings. Background tab：change the background image on the desktop.To locate an image you want as the background of the desktop in another folder,tap Browse. Figure 3-24... -
Page 30: K36 Hand-Held Function Use
（See Figure 3-25、3-26） Figure 3-25 Figure 3-26 to save, to cancel. 3.9 K36 Hand-held Function use Select "Control Panel"-"Settings" to view general system properties（See Figure 3-27） Figure 3-27... - Page 31 (1) Check the function informaitons: click the “info”button , enter the setting interface, (see figure 3-28) Figure 3-28 From this page,you can get the hard config information on the top,and the Ex-factory information of the pruduct. (2) Set scanning function Click the “scan”button,enter setting enterface(see figure 3-29-1、2):...
- Page 32 figure 3-29-1 figure 3-29-2 Set the terminal follow the picture,then click “OK”button to exit . (3) Set WIFI function Click the “WIFI” button , enter setting interface（see figure 3-30）: figure 3-30...
- Page 33 Follow the picture, click once, then “Return” the interface,and the WIFI function will auto run when the machine power (4) Set GPRS function button, enter the setting interface （see figure 3-31-1、 2） : Click figure 3-31-1 figure 3-31-2 1 step: enter the interface, click “power” button; , click into 2 step: back to the “control pannel”...
-
Page 34: Chapter 4 Keyboard & Input Mode
figure 3-32-1 figure 3-32-2 step:follow the picture , click “ connet ” ,then the terminal can connet to the internet. Note: Please inset the SIM card into the Card slot,before you connet the internet. Chapter 4 Keyboard & Input mode 4.1 Keyboard To toggle between different input modes, see 1.3 Key Action about button for detail.See 1.3 about other key actions. - Page 35 program.To show or hide the soft keyboard,tap the Keyboard Input Panel icon（See Figure 4-1） Figure 4-1 The Keyboard Input Panel appears（See Figure 4-2） ， Figure 4-2 To enter capital letters: （1）Tab on the keyboard input panel，tab to enter lowercase（See Figure 4-3） 。 （2）Tab on the keyboard input panel to a capital letter,and then lowercase.（See Figure 4-4）...
-
Page 36: Chapter 5 Installing & Removing Software
Figure 4-3 Figure 4-4 To enter expression，tab on the keyboard input panel，select when finished（See Figure 4-3） 。 what you want,tab To enter number：select the number on the keyboard input panel. Note：You can also enter them with keyboard.It is recommended that you enter letters with input panel,and use keyboard to enter numeric. Chapter 5 Installing &... -
Page 37: Installing Microsoft Activesync
Figure 5-1 ResidentFlash:You can save your files in the directory. Storage Card: what stores in SD card will show in the directory.You can also save your files in the directory. 5.2 Installing Microsoft ActiveSync Figure 5-2 When installing Microsoft ActiveSync，remove the terminal from the PC. -
Page 38: How To Install Software
5.3 How to install software 5.3.1 Preparation： ： ： ： After installation is complete,connect your terminal to your host computer with USB cable,the ActiveSync Setup Wizard will helps you to set up a partnersip. 5.3.2 Install software in your terminal： ： ： ： You can copy files to ResidentFlash through SD card or using Microsoft ActiveSync. -
Page 39: Appendix 1 Troubleshooting
Appendix 1 Troubleshooting Device&System problem Problem Solution Terminal power on fail ·Ensure battery is installed properly(See Chapter 2.2) ·Replace the lithium-ion battery in the terminal ·Reinstall the battery ·Try reset（See Chapter 2.9） Touch Panel does not respond ·Clean the touch panel ·Recalibrate ·Reset the terminal. -
Page 40: Communication Problem
·Reset the terminal. ·Replace battery lithium-ion battery can not be ·check if the AC adapter is damaged charged ·check if the AC adapter is linked to a power source. ·Be sure the AC adapter is installed firmly 2、 、 、 、 Communication problem Problem Solution PC does not recognize the... -
Page 41: Appendix 3 Customer Service
Appendix 4 Others Note 1：Please contact us for more information if you want application development based on K36. Note 2：Lastest manual is available on our website. Note 3：Contact us or browse our website if need any help.
Need help?
Do you have a question about the K36 and is the answer not in the manual?
Questions and answers
using a second micro sd card
To use a second micro SD card with the ShenZhen Keymantek K36:
1. Copy the desired files to the micro SD card using a PC.
2. Insert the micro SD card into the terminal.
3. On the terminal, double-click "My Computer" on the desktop.
4. Open "Storage Card" to access and execute files on the SD card.
There is no specific mention of support for a second micro SD card, so only one SD card is implied.
This answer is automatically generated
Hola no enciende el dispositivo
The ShenZhen Keymantek K36 device may not turn on due to the following reasons:
1. Battery Issues – The battery may be depleted or not properly installed. Ensure the battery is charged and correctly inserted.
2. Power Button Operation – The power key must be pressed correctly. Press it once to turn on the device or hold it for 3 seconds if needed.
3. Damaged Hardware – Physical damage or disassembly may void the warranty and cause the device to malfunction.
4. Software Issues – Unauthorized software installation may interfere with system operation. Only install programs permitted by Keymantek.
5. Environmental Factors – Exposure to static electricity or strong electromagnetic radiation may affect functionality.
If the device still does not turn on, troubleshooting or technical support may be required.
This answer is automatically generated
I'm only 14 so I don't understand how to play it.its my first time playing this game console what is this one called though I'm And I think no messed up the uhm.... Retro-pad settings and its like down is up and up is down,B is Y and A is X and I can't go right or up and down or anything. Sorry if I didn't describe the correct way I have trouble doing it
I'm having trouble with my k36 handheld game console
How do I play shooting games like duck hunt?