Getting Started; Speaker Placement Considerations - JL Audio Evolution C2-525 Owner's Manual

C2-525 SPECIFICATIONS:
Woofer: Injection-molded, Mica-filled, Polypropylene Cone,
Butyl Rubber Surround, 1 in. Voice Coil on Kapton® Former,
Flat, Symmetrical Roll Spider, Ferrite Magnet
Tweeter: 0.75 in. (19 mm) Silk Dome, Ferrofluid Cooling /
Damping, Neodymium Magnet
Crossover Networks: 1st Order Low-Pass Filter, 2nd Order
High-Pass Filter, 3-Position Adjustable Tweeter Level, Premium
Mylar® Capacitors Premium Air-Core Inductors
Continuous Power Handling: 60 Watts
Recommended Amp Power: 15-100 Watts per channel (RMS)
Efficiency: 89.0 dB @ 1W/1m | 95.0 dB @ 1W/0.5m
Sensitivity: 92.0 dB @ 2.83V/1m
Nominal Impedance: 4 ohm
Frequency Response: 63 Hz - 22 KHz ± 3 dB
Included Components and Parts:
Due to ongoing product development, all specifications are subject to change without notice.

GETTING STARTED

SPEAKER PLACEMENT CONSIDERATIONS

3