Advertisement
Mezzanine Card Installation
Before installing a mezzanine card to a motherboard, remove the motherboard from the
chassis. To do so, be sure to power down the system and remove all connected cables irst. For
more details, refer to the user manual that comes with your system.
Note: he illustrations are for reference only and may slightly diferent from the real products due to diferent models.
1
1. Install the four standofs into the
motherboard around the mezzanine
card slot.
3
3. Gently insert the mezzanine card
into the mezzanine card slot on the
motherboard.
When the mezzanine card is well installed, horizontally slide the motherboard back to the
chassis so the I/O connectors it through the I/O openings at the rear of the chassis. Well install
the motherboard to the chassis with screws. For more details, refer to the user manual that
comes with your motherboard.
2
2. Install the four lock nuts on the bolts
under the motherboard. Hand-tighten
the nuts.
4
4. Use screws to secure the mezzanine
card to the motherboard standofs.
Advertisement
