Remote Control Keys - Philips 7521D User Manual

Remote Control keys

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
* The signal strength indicator shows
the signal strength of the transmission
of the programme you are watching.
Standby
1
To set the TV to standby mode. To switch
the TV set on again, press
or the + P(age) – key.
2
Mode selector
To activate the remote control in TV, DVD
or AUX mode (see page 6).
Cancel
3
17
In digital mode, it functions as an exit key for
MHEG teletext when no coloured key links
are available to exit teletext mode.
TV menu
4
18
To display or edit from the analogue menus.
Cursor
5
These 4 keys are used to move within
the menu or to directly access the screen
19
formats.
6 Analogue or Digital mode
To switch the television between analogue
and digital mode.
20
7 Volume + / –
To adjust the sound level.
8
Mute
To disable or enable the sound.
21
Numerical keys
9
For direct access to programmes. For a 2
(3) digit programme number, the second
(third) digit must be entered before the dash
disappears. The number, the name (and the
sound mode, in analogue mode) are displayed
for a few seconds.
Screen information
10
In digital mode, press the key once to
display the information banner and the
second time to exit information banner
22
(see page 11).
23
In analogue mode, display/remove the
programme number, the sound mode, the
24
remaining time of the sleeptimer and the
*signal strength indicator.
25
Teletext / Sound mode
11
26
In teletext mode, it functions as a teletext
key (see pages 27-28).
27
In TV mode, it is used to force programmes
in Stereo and Nicam Stereo to Mono or,
for bilingual programmes, to choose between
Dualåor Dual». The Mono indication is red
when in forced position.
Subtitle mode
12
In digital mode, it activates or deactivates
the subtitle mode.
, to
5