Advertisement
Charger for disposable
batteries and accumulators Elixia
Thank you for purchasing Elixia. Use new and good quality brands of Alkaline, Ni-MH and NI-Cd
batteries and recharge them when a noticeable decline in their performance is evident.
How to use
1. Connect the power cable to the socket (AC 100 V – 240 V).
2. Insert the battery or batteries to be recharged in the correct orientation.
3. Wait until the LED indicator turns green indicating the end of the loading cycle.
4. Remove the batteries and unplug the power cord.
Elixia is equipped with status LED indicators
LED turns red: the battery is charging. If the red LED turns off when charging, the inserted
„
„
batteries are too old to be recharged.
LED turns green: end of charging.
„
„
LED is switched off: the battery is damaged physically/chemically/electrically.
„
„
Charging time
Type
Alkaline
Ni-MH
Ni-Cd
*Charge the batteries twice.
Warning
Elixia can only be used to recharge Alkaline, Ni-MH or Ni-Cd batteries and NOT TO BE USED
FOR OTHER types of batteries, such as ZINC-CARBON, LI-ION batteries or other RECHARGEABLE
BATTERIES/ACCUMULATORS. OLD, DAMAGED AND RUSTY BATTERIES SHALL NEVER BE
RECHARGED.
Please be aware that storing batteries in such a way that the positive and negative poles
„
„
touch will discharge them.
Do not charge old unused, defective, Carbon-Zinc or rechargeable batteries. This may
„
„
cause battery overheating and leakage of chemicals and damage to the battery charger.
Never try to open the battery charger. It will void its warranty and may cause fire or electric
„
„
shock.
Keep the battery charger away from heat and do not expose to sunlight.
„
„
STRONG does not accept any liability for the battery or any consequential damage and cannot
guarantee charging of batteries despite proper handling.
Size
Capacity
AAA/AA
800 mAh
AAA/AA
2300 mAh
400 mAh
AAA/AA
800 mAh
2200 mAh
Approx. charging time
1.5 V
4 h.
1.5 h.
4.5 h.*
1 h.
1.5 h.
4.5 h.*
English
Advertisement
