Honda Odyssey 2018 Owner's Manual page 114

uuIndicatorsuDriver Information Interface Warning and Information Messages
Message
• Appears when you pull the electric parking brake
• Appears as soon as a problem is detected in the
• Appears as soon as a problem is detected in the push
• Appears if there is a problem with the Auto high-
• Appears when the Auto high-beam is in operation,
• Appears when the area around the camera is
• May appear when driving in bad weather (rain,
* Not available on all models
112
Condition
switch without depressing the brake pedal.
Models with smart entry system
smart entry system.
button starting system.
Models with Auto high-beam
beam.
Models with Auto high-beam
or the headlight switch is turned in AUTO, but the
temperature inside the camera is too high. The Auto
high-beam cancels automatically.
Models with Auto high-beam
blocked by dirt, mud, etc. Stop your vehicle in a safe
place, and wipe it off with a soft cloth.
snow, fog, etc.)
Explanation
• Depress the brake pedal to release the parking brake.
2 Parking Brake P. 600
• Appears constantly - Have your vehicle checked by a
dealer.
• Appears constantly - Have your vehicle checked by a
dealer.
• Manually operate the headlight switch.
• If you are driving with the high-beam headlights when
this happens, the headlights are changed to low beams.
• Use the climate control system to cool down the
camera.
• Goes off - The camera has been cooled down. Turning
the headlight switch to AUTO can resume the system.
2 Front Sensor Camera *
• Have your vehicle checked by a dealer if the message
comes back on after you cleaned the area around the
camera.
P. 562