SnowDogg MD75 Owner's Manual page 10

Light aiming Diagram
Screen Located
25' from Headlights
sToRaGe
1. Before disconnecting the plow from your vehicle, fully compress the lift cylinder
2. Disconnect the plow from your vehicle
3. Coat all electrical connection points with dielectric grease
4. Repair/touch up any chipped paint or rusted areas
5. Apply a coat of oil or grease to all exposed chrome (on angle and lift cylinders)
6. Grease all grease fittings on trip pins and king pin
ReMoVal fRoM sToRaGe
1. Check all fasteners and hydraulic fittings for tightness.
2. Replace any cracked hydraulic hoses
3. Coat all electrical connection points with dielectric grease
4. Connect plow to vehicle
MaInTenanCe
The SnowDogg line of plows has been simply designed for reliable service. In order to ensure the
reliability of your plow, observe the following maintenance items and regularly inspect:
• Fasteners and retaining devices for proper installation and tightness.
• Hydraulic cylinders for damage, pitting or leakage
• Hydraulic hoses for wear, damage or leakage. Replace any damaged hose.
• All electrical connections for corrosion – apply dielectric grease as required
• Cutting edge wear
• Plow shoe wear
• Greasable fittings (2x trip pins and king pin)
HYDRaulIC sYsTeM
• All SnowDogg plows use S.A.M. brand Low-Temperature Blue Hydraulic Fluid (P/N 1307005).
• The reservoir should be filled until the oil is visible in the elbow fitting at the end of the reservoir.
• Recheck and tighten all fittings and valves every season as necessary. Do NOT use loctite or Teflon on
any fittings or valves.
With proper maintenance and care your snowDogg plow will provide years of trouble free service!
Align with Vehicle
Vertical Centerline
Centerline
Ahead of Right Headlight
Distance Between
Headlight Centers
10
High Intensity Zones
For Type 2 (Sealed Beam)
Headlights on Low Beam
16992200 Rev E