® TRV A88SE TABLE OF CONTENTS Thank you Diagram General Instructions Specifications Opening the Package Connections Operation Warning Warranty Troubleshooting Product Image Distributor Copyright Triode Corporation Ltd. - 2005. All rights reserved. Reproduction in whole or part of text, logo, graphics or schematics is strictly forbidden without permission, in writing, of Triode Corporation Ltd - Japan The information in this manual is subject to change without further notice.
® TRV A88SE DIAGRAM Diagram 1. TRV-A88 front panel Power switch Volume Power indicator Input selector Diagram 2. TRV-A88 back plate Input jack L channel output R channel output Power socket (with fuse)
Two KT-88s are used for class A S.E amplification. • The toroid power transformer and EI audio output transformer are specially manufactured for TRI TRV-A88 by applying our unique workmanship, which has low magnetic leakage, wide frequency response and low impedance. •...
® TRV A88SE CONNECTION • Select the suitable output impedance for your speaker and connect the amplifier to the speaker with specialized sound cable, don’t confuse L with R. • Connect the amplifier to your sound source, don’t confuse L with R. Select the suitable input mode for the sound source.
® TRV A88SE VIII TROUBLESHOOTING Basic troubleshooting of an amplifier is similar to the troubleshooting of any other lectrical or electronic equipment. Always check the most obvious possible causes first. To give you a few ideas of what to look for, check the following.
Need help?
Do you have a question about the TRV A88SE and is the answer not in the manual?
Questions and answers